IBM 8668 Hardware Maintenance Manual - Page 91
Installing the cover (tower), Installing the bezel and door (tower), Hold the cover against the server
UPC - 087944723158
View all IBM 8668 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Installing the cover (tower) Note: The illustrations in this document might differ slightly from your hardware. Slots Left-side cover To install the server left-side cover: 1. Align the cover with the left side of the server, approximately 25 mm (1 inch) from the front of the server; place the bottom of the cover on the bottom rail of the chassis. 2. Insert the tabs at the top of the cover into the slots at the top of the server. 3. Hold the cover against the server, and slide the cover toward the front of the server until the cover clicks into place. Installing the bezel and door (tower) Note: The illustrations in this document might differ slightly from your hardware. Bezel Door Flange To install the bezel: 1. Place the tabs at the bottom edge of the bezel in the slots at the bottom front of the server. Installing options 83