IBM 8668 Hardware Maintenance Manual - Page 121
Reseat I2C cables between Advanced System Management, 250-000 System Management: Failed
UPC - 087944723158
View all IBM 8668 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Error Code/Symptom FRU/Action 166-201-000 System Management: Failed 1. If installed, Reseat I2C cable between Advanced System (I2C Bus Error(s). ISMP indicates I2C errors Management adapter (in PCI slot 1/J44) and system board (J54). on bus 0. Potential FRU: Memory DIMMS, system board) 2. Reseat Memory DIMMS 3. Memory DIMMS 4. System Board 166-201-002 System Management: Failed 1. Reseat I2C cable between operator information panel and system (I2C Bus Error(s). ISMP indicates I2C errors board (J39). on bus 2. Potential FRUs: LED front panel, system board) 2. Operator information panel 3. System Board 166-201-003 System Management: Failed 1. Reseat cables between power backplane and planar. (I2C Bus Error(s). ISMP indicates I2C errors on bus 3. Potential FRUs: power backplane, 2. Power backplane system board) 3. System Board 166-201-004 System Management: Failed 1. If installed, reseat I2C cable between DASD backplane and DASD (I2C Bus Error(s). ISMP indicates I2C errors I2C on system board (J9). on bus 4. Potential FRUs: DASD backplane, system board) 2. System Board 166-201-005 System Management: Failed 1. Reseat Memory DIMMS (I2C Bus Error(s). ISMP indicates I2C errors on bus 0, 1, or 5. Potential FRUs: Memory 2. Reseat processors DIMMS, CPUs, system board) 3. Memory DIMMS 4. Processors 5. System Board 166-250-000 System Management: Failed (I2C cable is disconnected. Reconnect I2C cable between Remote Supervisor Adapter and System Board.) 1. Reseat I2C cables between Advanced System Management adapter (in PCI slot 1/J44) and system board (J54) 2. I2C Cable(s) 166-260-000 System Management: Failed (Unable to restart ASM adapter). (Restart ASM adapter Error. After restarting, ASM communication was lost. Unplug and cold boot to reset ASM adapter.) 1. Disconnect all server and option power cords from server, wait 30 seconds, reconnect, and retry. 2. Reseat Advanced System Management adapter (in PCI slot 1/J44). 3. Advanced System Management adapter 166-342-000 System Management: Failed (ASM adapter BIST indicate failed tests). 1. Ensure latest firmware levels for ASM and BIOS. 2. Disconnect all server and option cords from server, wait 30 seconds, reconnect, and retry. 3. Advanced System Management adapter 166-400-000 System Management: Failed (System Management hardware on system board failed) (ISMP Self Test Result failed tests: x where x = Flash, RAM, or ROM) 1. Re-flash or Update firmware for ISMP 2. System Board 180-XXX-000 (Diagnostics LED failure) 1. Run Diagnostic LED test for the failing LED. 180-XXX-001 (Failed Front LED panel test) 1. Operator Information Panel 2. System Board 180-XXX-002 (Failed Diagnostics LED Panel 1. System Board test) 180-361-003 (Failed Fan LED test) 1. Fan(s) 2. System Board Symptom-to-FRU index 113