IBM 8668 Hardware Maintenance Manual - Page 93
Installing the bezel (rack), Connecting external options
UPC - 087944723158
View all IBM 8668 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Installing the bezel (rack) Note: The illustrations in this document might differ slightly from your hardware. Bezel To install the bezel: 1. Place the tabs on the left side of the bezel in the slots at the left front of the server. 2. Press the right end of the bezel toward the server until the bezel clicks into place. Connecting external options If you install a SCSI adapter, you can attach a SCSI storage expansion enclosure to the server. You can attach additional external options to the input/output connectors on the rear of the server. See "Input/output ports" on page 86 for additional information. To attach an external device: 1. Read "Before you begin" on page 47 and the documentation that comes with the options. 2. Turn off the server and all attached devices. 3. Follow the instructions that come with the option to prepare it for installation and to connect it to the server. Note: If you are attaching a SCSI device, see "Ultra160 SCSI ports" on page 93 for SCSI ID and cabling information. Installing options 85