IBM 8668 Hardware Maintenance Manual - Page 129
Remove Failing PCI Card
UPC - 087944723158
View all IBM 8668 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Error Code/Symptom FRU/Action 5962 (IDE CD-ROM configuration error) 1. Run Configuration/Setup 2. CD-ROM Drive 3. CD-ROM Power Cable 4. IDE Cable 5. System Board 6. Battery 8603 (Pointing Device Error) 1. Pointing Device 2. System Board 00019501 (Processor 1 is not functioning check VRM and processor LEDs) 1. VRM 1 2. Processor 1 3. System Board 00019502 (Processor 2 is not functioning check VRM and processor LEDs) 1. VRM 2 2. Processor 2 3. System Board 00019701 (Processor 1 failed BIST) 1. Processor 1 2. System Board 00019702 (Processor 2 failed BIST) 1. Processor 2 2. System Board 00180100 (A PCI adapter has requested memory resources that are not available) 1. Reorder the adapters in the PCI slots. It is important that your boot device is positioned early in the scan order so that it is executed by POST. 2. Ensure that the PCI adapter and all other adapters are set correctly in the Configuration/Setup Utility program. If the memory resource settings are not correct, change the settings. 3. If all memory resources are being used, you might need to remove an adapter to make memory available to the PCI adapter. Disabling the adapter BIOS on the adapter should correct the error. Refer to documentation provided with the adapter. 00180200 (No more I/O space available for PCI adapter) 1. Run Configuration/Setup 2. Failing Adapter 3. System Board 00180300 (No more memory (above 1MB for PCI adapter)) 1. Run Configuration/Setup 2. Failing Adapter 3. System Board 00180400 (No more memory (below 1MB for PCI adapter)) 1. Run Configuration/Setup 2. Move the failing adapter to slot 1 or 2 3. Failing Adapter 4. System Board 00180500 (PCI option ROM checksum error) 1. Remove Failing PCI Card 2. System Board 00180600 (PCI built-in self test failure) PCI to PCI Bridge error 1. Run Configuration/Setup 2. Move the failing adapter to slot 1 or 2 3. Failing Adapter 4. System Board Symptom-to-FRU index 121