IBM 867431X Hardware Maintenance Manual - Page 124
PCI riser card, System board, Remove the microprocessors. See
View all IBM 867431X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
6. Slide the power supply away from the side of the chassis and lift up to remove. PCI riser card To remove the PCI riser card: Note: Read"Safety information" on page 147 and "Before you begin" on page 45. 1. Power off the server/workstation. 2. Remove the cover. See "Removing the cover" on page 48. 3. Remove any adapters and put them in a safe place. 4. Disconnect cables. 5. Gently lift up on the card to disconnect it from the system board port. System board To remove the system board: Note: Read"Safety information" on page 147 and "Before you begin" on page 45. 1. Power off the server/workstation. 2. Remove the cover. See "Removing the cover" on page 48. 3. Disconnect all cables from the system board. 4. Remove the adapter retaining latch (see "Removing a microprocessor" on page 90). 5. Remove the microprocessors. See "Removing a microprocessor" on page 90. 6. Remove the memory modules. See "Installing memory modules" on page 85. 7. Remove screws from the system board. 8. Remove the four screws from the rear of the server/workstation. 9. Pull up on the system board to remove from the chassis. 116 Hardware Maintenance Manual: xSeries 330 Type 8674, IntelliStation R Pro Type 6851, and Network Equipment Building System Type 8674