IBM 867431X Hardware Maintenance Manual - Page 131

Fixed Disk with SCSI ID NN on RAID adapter in PCI slot S., Remove USB devices from USB1 and USB2.

Get IBM 867431X - Eserver xSeries 330 PDF manuals and user guides View all IBM 867431X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 131 highlights

000 The test passed. 195 The Esc key was pressed to abort the test. 197 This is a warning error and may not indicate a hardware failure. For all error codes, replace/follow the FRU/Action indicated. Error Code/Symptom FRU/Action 001-XXX-000 (Failed core tests) 1. System Board 001-XXX-001 (Failed core tests) 1. System Board 001-250-000 (Failed System Board ECC) 1. System Board 001-250-001 (Failed Processor Board ECC) 1. System Board 005-XXX-000 (Failed Video test) 1. Video adapter (if installed) 2. System Board 011-XXX-000 (Failed COM1 Serial Port test) 1. Check loopback plug connected to externalized serial port 2. Check cable from externalized port to system board. Should connect to Serial Port A on the system board (J52). 3. System Board 011-XXX-001 (Failed COM2 Serial Port test) 1. Check loopback plug connected to externalized serial port 2. Check cable from externalized port to system board. Should connect to Serial Port B on the system board (J51). 3. System Board 014-XXX-000 (Failed Parallel Port test) 1. System Board 015-XXX-001 (USB interface not found, board damaged) 1. System Board 015-XXX-198 (USB device connected during 1. Remove USB devices from USB1 and USB2. USB test) 2. System Board 020-XXX-000 (Failed PCI Interface test) 1. System Board 030-XXX-000 (Failed Internal SCSI interface 1. System Board test) 035-XXX-099 1. No RAID adapters were found. 2. If adapter is installed re-check connection. 035-XXX-S99 (Failed RAID test on PCI slot S, check System Error Log before replacing a FRU) 1. RAID Adapter 2. SCSI Backplane 3. Cable 035-XXX-SNN (Check System Error Log before replacing a FRU, NN = SCSI ID of failing fixed disk) 1. Fixed Disk with SCSI ID NN on RAID adapter in PCI slot S. 035-253-S99 (RAID adapter initialization failure) 1. ServeRAID Adapter in slot S is not configured properly. Obtain the basic and extended configuration status and refer to the ServeRAID Hardware Maintenance Manual for more information. 2. Cable 3. SCSI Backplane 4. Adapter Symptom-to-FRU index 123

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
000
The test passed.
195
The
Esc
key was pressed to abort the test.
197
This is a warning error and may not indicate a hardware failure.
For all error codes, replace/follow the FRU/Action indicated.
Error Code/Symptom
FRU/Action
001-XXX-000
(Failed core tests)
1.
System Board
001-XXX-001
(Failed core tests)
1.
System Board
001-250-000
(Failed System Board ECC)
1.
System Board
001-250-001
(Failed Processor Board ECC)
1.
System Board
005-XXX-000
(Failed Video test)
1.
Video adapter (if installed)
2.
System Board
011-XXX-000
(Failed COM1 Serial Port test)
1.
Check loopback plug connected to externalized serial port
2.
Check cable from externalized port to system board. Should
connect to Serial Port A on the system board (J52).
3.
System Board
011-XXX-001
(Failed COM2 Serial Port test)
1.
Check loopback plug connected to externalized serial port
2.
Check cable from externalized port to system board. Should
connect to Serial Port B on the system board (J51).
3.
System Board
014-XXX-000
(Failed Parallel Port test)
1.
System Board
015-XXX-001
(USB interface not found,
board damaged)
1.
System Board
015-XXX-198
(USB device connected during
USB test)
1.
Remove USB devices from USB1 and USB2.
2.
System Board
020-XXX-000
(Failed PCI Interface test)
1.
System Board
030-XXX-000
(Failed Internal SCSI interface
test)
1.
System Board
035-XXX-099
1.
No RAID adapters were found.
2.
If adapter is installed re-check connection.
035-XXX-S99
(Failed RAID test on PCI slot
S, check System Error Log before replacing
a FRU)
1.
RAID Adapter
2.
SCSI Backplane
3.
Cable
035-XXX-SNN
(Check System Error Log
before replacing a FRU, NN = SCSI ID of
failing fixed disk)
1.
Fixed Disk with SCSI ID NN on RAID adapter in PCI slot S.
035-253-S99
(RAID adapter initialization
failure)
1.
ServeRAID Adapter in slot S is not configured properly.
Obtain
the basic and extended configuration status and refer to the
ServeRAID Hardware Maintenance Manual for more information.
2.
Cable
3.
SCSI Backplane
4.
Adapter
Symptom-to-FRU index
123