IBM 867431X Hardware Maintenance Manual - Page 83
Configuration, Settings, PPP Settings, Network Interface, IP Address, Subnet Mask, Line Type
View all IBM 867431X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
1. If you completed the procedure for configuring the serial port and the Configuration Settings window is open, go to step 6; otherwise, continue with step 2. 2. Turn on the server. 3. Insert the IBM Remote Supervisor Adapter Support CD into the CD-ROM drive and close the CD-ROM drive before the server completes POST. Note: If you do not insert the CD and close the CD-ROM drive before POST completes, you must restart the server with the CD in the CD-ROM drive. 4. The CD starts automatically and the IBM Remote Supervisor Utility window opens. 5. Use the Up Arrow and Down Arrow keys (↑ and ↓) to select Configuration Settings; then, press Enter. The Configuration Settings window opens. 6. Use the arrow keys to select PPP Settings; then, press Enter. The PPP Settings window opens. Note: The values in the following windows are only examples; your settings will be different 7. Use the arrow keys to navigate to each field. Verify the values in the following fields: Network Interface The default is Disabled. Change this field to Enabled. IP Address The default value is 192.96.1.1. Make sure that the client is configured to allow the server to assign this IP Address. Subnet Mask The default value is 255.255.255.255. Line Type The default is PPP. Remote IP Address The default value is 192.96.1.2. Installing options 75