IBM 867431X Hardware Maintenance Manual - Page 72
Remote Supervisor Adapter components, connector, see
View all IBM 867431X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Cover release lever Screws 4. Remove the expansion-slot cover from PCI slot 2. Store it in a safe place for future use. Attention: Expansion-slot covers must be installed in all vacant slots. This maintains the electronic emission characteristics of the server and ensures proper cooling of server components. 5. Remove the adapter from the static-protective package. Attention: Avoid touching the components and gold-edge connectors on the adapter. 6. Install the adapter as follows: a. Carefully grasp the adapter by its top edge or upper corners, and align it with PCI slot 2 on the system board. Note: You must install the Remote Supervisor Adapter in PCI slot 2. b. Press the adapter firmly into the PCI slot. Be sure it is firmly seated. Attention: When you install the adapter in the server, be sure that it is completely and correctly seated in the system-board connector before you apply power. Incomplete insertion might cause damage to the system board or the adapter. Note that power can also be provided to the adapter through the system management connector (for the location of this connector, see "Remote Supervisor Adapter components" on page 62). 7. Connect the internal cables to the adapter. Note that the 20-pin ribbon cable (see "Inventory checklist" on page 60), which connects the system management connector on the Remote Supervisor Adapter to the system board at J57 (see "System board options connectors" on page 44), also supplies power to the adapter. 64 Hardware Maintenance Manual: xSeries 330 Type 8674, IntelliStation R Pro Type 6851, and Network Equipment Building System Type 8674