IBM 867431X Hardware Maintenance Manual - Page 33
Temperature checkout, In addition
View all IBM 867431X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
7. Reinstall the server/workstation cover and connect the cables. 8. Turn on the server/workstation. 9. Start the Configuration/Setup Utility program and set configuration parameters. v Set the system date and time. v Set the power-on password. v Reconfigure the server/workstation. Temperature checkout Proper cooling of the system is important for proper operation and system reliability. For a typical xSeries server/workstation, you should make sure: v Each of the drive bays has either a drive or a filler panel installed v The top cover is in place during normal operation v There is at least 50 mm (2 inches) of ventilated space at the sides of the server/workstation and 100 mm (4 inches) at the rear of the server/workstation v The top cover is removed for no longer than 30 minutes while the server/workstation is operating v A removed hot-swap drive is replaced within two minutes of removal v Cables for optional adapters are routed according to the instructions provided with the adapters (ensure that cables are not restricting air flow) v The fans are operating correctly and the air flow is good v A failed fan is replaced within 48 hours In addition, ensure that the environmental specifications for the system are met. See "Features and specifications" on page 4. Note: The server/workstation is not designed to operate in an enclosed environment. The xSeries 330 should not reside behind a glass door in its rack enclosure. For more information on specific temperature error messages, see "Temperature error messages" on page 131. Diagnostics 25