Icom IC-7600 Instruction Manual - Page 106
MEMORY OPERATION, ■ Memory channels, ■ Memory channel selection, ◇ Using the [▲]/[▼] keys
View all Icom IC-7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
6 MEMORY OPERATION ■ Memory channels The transceiver has 101 memory channels. Memory mode is very useful for quick change to often-used frequencies. All 101 memory channels are tunable which means the programmed frequency can be tuned temporarily with the main dial, etc. in memory mode. MEMORY CHANNEL MEMORY CHANNEL NUMBER CAPABILITY TRANSFER TO VFO Regular memory channels 1-99 One frequency and one mode in each memory channel. Yes Scan edge memory channels One frequency and one mode in each P1, P2 memory channel as scan edges for Yes programmed scan. OVERWRITING Yes Yes CLEAR Yes No ■ Memory channel selection D Using the keys q Push [VFO/MEMO] to select memory mode. w P ush several times to select the desired memory channel. • Push and hold for continuous selection. • [UP] and [DN] on the microphone can also be used. e To return to VFO mode, push [VFO/MEMO] again. D Using the keypad q Push [VFO/MEMO] to select memory mode. w Push [F-INP ENT]. e P ush the desired memory channel number using the keypad. • Enter 100 or 101 to select scan edge channel P1 or P2, respectively. r P ush [∫] or [√] to set the memory channel. [EXAMPLE] To select the memory channel 3; - Push [F-INP ENT], [7 3], then push [∫] or [√]. To select the memory channel 12; - Push [F-INP ENT], [1.8 1], [3.5 2], then push [∫] or [√]. To select the scan edge channel P1; - Push [F-INP ENT], [1.8 1], [50 0], [50 0], then push [∫] or [√]. To select the scan edge channel P2; - Push [F-INP ENT], [1.8 1], [50 0], [1.8 1], then push [∫] or [√]. VFO/MEMO Keypad F-INP ENT VFO/MEMO 99