Icom IC-7600 Instruction Manual - Page 53
■ RTTY (FSK) operation, RTTY/PSK], DECODE]
View all Icom IC-7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
■ RTTY (FSK) operation A DSP-based high-quality Baudot RTTY encoder/ decoder is built-in to the IC-7600. When connecting a PC keyboard (pgs. 18, 19), RTTY operation can be performed without an external RTTY terminal, TNC or PC. If you would rather use your RTTY terminal or TNC, consult the manual that comes with the RTTY terminal or TNC. q Push a band key to select the desired band. w Push [RTTY/PSK] to select RTTY. • After RTTY mode is selected, push and hold [RTTY/PSK] for 1 sec. to toggle between RTTY and RTTY-R modes. • "RTTY" or "RTTY-R" appears. • RTTY tuning indicator appears. e P ush [DECODE] (F-3) to display the decode screen. • The IC-7600 has a built-in Baudot decoder. r T o tune the desired signal, aim for a symmetrical waveform and ensure the peak points align with the mark (2125 Hz) and shift (170 Hz) frequency lines in the FFT scope. • The S-meter indicates received signal strength when signal is received. t P ress [F12] on the connected PC's keyboard to transmit. • [TX] indicator lights red. y T ype from the keyboard to enter the contents that you want to transmit. • The typewritten contents are indicated in the TX buffer screen and transmitted immediately. • The text color will be changed when transmitted. • Press one of [F1]-[F8] on the keyboard to transmit the TX memory contents. u Press [F12] on the keyboard to return to receive. ✔ For your convenience The transmission contents can be typed before being transmitted. q Perform the steps q to r above. w T ype from the connected keyboard to enter the message that you want to transmit. • The typewritten contents are indicated in the TX buffer screen. e P ress [F12] of the connected keyboard to transmit the typewritten contents. • The color of displayed text, in the TX buffer screen, will be changed when transmitted. • To cancel the transmission, press [F12] twice. r Press [F12] of the keyboard to return to receive. 4 RECEIVE AND TRANSMIT [TX] [RX] DECODE indicator indicator F-3 Band keys RTTY/PSK Appears EXIT/SET Main dial Appears TX buffer screen FFT scope TX/RX contents screen Water-fall 2125/170 1905 2515 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 46