Icom IC-7600 Instruction Manual - Page 83
■ IF filter selection, ◇ Filter passband width setting (except FM mode)
View all Icom IC-7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
4 RECEIVE AND TRANSMIT ■ IF filter selection The transceiver has 3 passband width IF filters for each mode. For SSB, CW and PSK modes, the passband width can be set within 50 to 3600 Hz in 50 or 100 Hz steps. A total of 41 passband widths are available. For RTTY mode, the passband width can be set within 50 to 2700 Hz in 50 or 100 Hz steps. A total of 32 passband widths are available. For AM mode, the passband width can be set within 200 Hz to 10 kHz in 200 Hz steps. A total of 50 passband widths are available. For FM mode, the passband width is fixed and 3 passband widths are available. The filter selection is automatically memorized in each mode. The PBT shift frequencies are automatically memorized in each filter. D IF filter selection q Select the desired mode. w P ush [FILTER] several times to select the IF filter 1, 2 or 3. • The selected passband width and filter number is dis- played in the LCD. D Filter passband width setting (except FM mode) q P ush and hold [FILTER] for 1 sec. to enter filter set screen. w Select any mode except FM. • Passband widths for FM modes are fixed and cannot be set. e P ush [FILTER] several times to select the desired IF filter. r P ush [BW] (F-1), then rotate the main dial to adjust the desired passband width. Then push [BW] (F-1) to set. • While pushing and holding [BW] (F-1), rotating the main dial also adjusts the passband width. After adjust- ment, release [BW] (F-1) to set. • In SSB, CW and PSK modes, the passband width can be set within the following range. 50 to 500 Hz 50 Hz steps 600 to 3600 Hz 100 Hz steps • In RTTY mode, the passband width can be set within the following range. 50 to 500 Hz 50 Hz steps 600 to 2700 Hz 100 Hz steps • In AM mode, the passband width can be set within the following range. 200 Hz to 10 kHz 200 Hz steps • Push and hold [DEF] (F-4) for 1 sec. to select a default value. (Roofing filter setting also selects a default value.) t Repeat steps w to r if desired for other modes. y Push [EXIT/SET] to exit filter set screen. DEF F-4 F-1 FILTER EXIT/SET Main dial BW Selected Passband IF filter width • During the passband width setting Blinks The PBT shift frequencies are cleared when the passband width is changed. This filter set screen graphically displays the PBT shift frequencies and CW pitch operations. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 76