Icom IC-7600 Instruction Manual - Page 95
■ Split frequency operation, SPLIT], CHANGE], F-INP ENT]
View all Icom IC-7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
4 RECEIVE AND TRANSMIT ■ Split frequency operation Split frequency operation allows you to transmit and receive in the same mode on two different frequencies. Split frequency operation is performed using 2 frequencies on the main and sub readouts. The following is an example of setting 21.290 MHz for receiving and 21.310 MHz for transmitting. q Set 21.290 MHz (USB) in VFO mode. w P ush [SPLIT], then push and hold [CHANGE] for 1 sec. • The quick split function is much more convenient for selecting the transmit frequency. See the next section for details. • The equalized transmit frequency and " " appear on the LCD. • [SPLIT] indicator lights. • " " appears to show the transmit frequency read- out. e While pushing and holding [XFC], rotate the main dial to set the transmit frequency to 21.310 MHz. • The transmit frequency can be monitored while push- ing [XFC]. r N ow you can receive on 21.290 MHz and transmit on 21.310 MHz. To change the transmit and receive frequencies, push [CHANGE] to exchange the main and sub readouts. ✔ CONVENIENT • Direct shift frequency input The shift frequency can be entered directly. q Push [F-INP ENT]. w Enter the desired shift frequency with the digit keys. • 1 kHz to 9.999 MHz can be set. • When you require a negative shift direction, push [GENE •] in advance. e P ush [SPLIT] to input the shift frequency in the sub readout and the split function is turned ON. • Dualwatch function The dualwatch function is convenient for tuning the transmit frequency while monitoring both frequencies used for transmitting and receiving. • Split lock function (p. 129) Accidentally releasing [XFC] while rotating the main dial changes the receive frequency. To prevent this, use both the split lock and dial lock functions to change the transmit frequency only. The split lock function cancels the dial lock function while pushing [XFC] during split frequency operation. The split lock function is OFF by default, but can be turned ON in others set mode. [SPLIT] indicator SPLIT MAIN /SUB M.SCOPE CHANGE XFC • When the split function ON Main dial • When [XFC] is pushed • The split frequency operation is ready 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 88