Icom IC-7600 Instruction Manual - Page 87
SPLIT], DUALWATCH], SCAN] F-5, PROG] F-1, F] F-2, EXIT/SET], to start the pro
View all Icom IC-7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
• Scanning during dualwatch Scanning operates only for the main readout. To operate the scan during dualwatch, scan on the main readout and use the sub readout for your QSO using both dualwatch and split frequency operation. q P rogram the desired programmed scan edges in the same amateur band. See p. 101 for program- ming. • If you plan to operate a ∂F scan, programming the scan edges may not be necessary. w P ush [SPLIT] to turn the split frequency function ON. • " " appears. e Select VFO mode for the main readout. r S et the desired operating frequency for the main readout. t Push and hold [DUALWATCH] for 1 sec. • " " appears. • Equalized receive frequency and operating mode appear on the sub band readout and the dualwatch function is turned ON. y Push [SCAN] (F-5) to select the scan screen. • Push [EXIT/SET] several times to close a multi-func- tion screen, if necessary. u P ush [PROG] (F-1) or [∂F] (F-2) to start the pro- grammed scan or ∂F scan, respectively. • Scan activates on the main readout between the pro- grammed scan edges or within the ∂F span. • Transmitting on the sub readout stops the scan. i To cancel the scan, push [EXIT/SET]. 4 RECEIVE AND TRANSMIT DUAL WATCH SPLIT F-1 F-2 PROG ∂F F-5 SCAN EXIT/SET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 80