Icom IC-7600 Instruction Manual - Page 58
◇ RTTY decode set mode, Scope, Averaging, Decode, CR, LF, CR+LF, Diddle, BLANK
View all Icom IC-7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
4 RECEIVE AND TRANSMIT D RTTY decode set mode This set mode is used to set the decode USOS function, time stamp setting, etc. • Setting contents q D uring RTTY mode operation, push [DECODE] (F-3) to select RTTY decode screen. w P ush [] (F-1) to select the second RTTY decode menu, then push [SET] (F-5) to select RTTY decode set mode. • Push [WIDE] (F-6) to toggle the screen size from nor- mal and wide. e P ush [Y] (F-1) or [Z] (F-2) to select the desired set item. r Set the desired condition using the main dial. • Push and hold [DEF] (F-4) for 1 sec. to select a default condition or value. • Push [Ω ≈] (F-3) to select the set contents for some items. t Push [EXIT/SET] to exit from set mode. F-1 F-2 F-3 DEF F-4 SET WIDE F-5 F-6 F-1 F-3 DECODE EXIT/SET Main dial • RTTY decode set mode screen RTTY FFT Scope Averaging Select the FFT scope waveform averaging function from 2 to 4 and OFF. (default: OFF) OFF Recommendation! If you use the FFT scope waveform for tuning, use of the default or smaller averaging setting is recommended. RTTY FFT Scope Waveform Color Set the color for the FFT scope waveform. • The color is set in RGB format. • The set color is indicated in the box beside the RGB scale. 51 153 255 • Push [Ω ≈] (F-3) to select R (Red), G (Green) and B (Blue), and then rotate the main dial to set the ratio from 0 to 255. RTTY Decode USOS Turn the capability of letter code decoding after receiving a "space" (USOS; UnShift On Space function) ON and OFF. ON • ON : Decode as letter code. • OFF : Decode as character code. RTTY Decode New Line Code Selects the new line code of the internal RTTY decoder. CR: Carriage Return, LF: Line Feed CR,LF,CR+LF • CR,LF,CR+LF : Makes new line with any codes. • CR+LF : Makes new line with CR+LF code only. RTTY Diddle Selects the diddle condition. BLANK • OFF : Turns the diddle function OFF. • BLANK : Transmits blank code during no code transmission. • LTRS : Transmits letter code during no code transmission. 51