Icom IC-7600 Instruction Manual - Page 51
◇ Keyer set mode, Keyer, Repeat, Dot/Dash, Ratio - specifications
View all Icom IC-7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
4 RECEIVE AND TRANSMIT D Keyer set mode This set mode is used to set the memory keyer repeat time, dash weight, paddle specifications, keyer type, etc. • Setting contents q D uring CW mode operation, push [KEYER] (F-3) to select memory keyer screen. w P ush [EXIT/SET] to select memory keyer menu, then push [CW KEY] (F-4) to select keyer set mode. e P ush [Y] (F-1) or [Z] (F-2) to select the desired set item. r Set the desired condition using the main dial. • Push and hold [DEF] (F-4) for 1 sec. to select the default condition or value. t Push [EXIT/SET] twice to normal screen. Keyer Repeat Time When sending CW using the repeat timer, this item sets the time between transmission. Dot/Dash Ratio This item sets the dot/dash ratio. Keying weight example: Morse code "K" Weight setting: DOT (fixed*) DASH DASH 1:1:3 (default) Weight setting: Adjusted Adjustable range SPACE (fixed*) *SPACE and DOT length can be adjusted with [KEY SPEED] only. Rise Time This item sets the rise time of the transmitted CW envelope. • About rise time Tx Key action Rx Tx output power Set Tx power level 0 Rise time Time DEF / CW KEY F-4 F-1 F-2 F-3 EXIT/SET KEYER Main dial • Keyer set mode screen 2s • 1 to 60 sec. in 1 sec. steps can be selected. (default: 2 sec.) 1:1:3.0 • 1:1:2.8 to 1:1:4.5 (in 0.1 steps) can be selected. (default: 1:1:3.0) 4ms • 2, 4, 6, 8 or 10 msec. can be selected. (default: 4 msec.) Key clicks on nearby frequencies can be generated if the rise time of a CW waveform is too short. ☞ Continues to the next page. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 44