Home » Icom Manuals » Two-Way Radios » Icom IC-7600 » Manual Viewer

Icom IC-7600 Instruction Manual - Page 13

Voice Memory Record Switch [rec], Voice Memory Playback Switch [play] - computer control

Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

1 PANEL DESCRIPTION @1 MODE SWITCHES Selects the desired mode. (p. 32) • Announces the selected mode via the speech synthesizer. (p. 35) [SSB] ➥ Selects USB and LSB modes alternately when pushed. ➥ Selects SSB data mode (USB-D, LSB-D) when pushed and held for 1 sec. in SSB mode. • In SSB data mode, push to return to SSB mode. ➥ Switches D1, D2 and D3 when pushed and held for 1 sec. in SSB data mode. [CW] Selects CW and CW-R (CW reverse) modes alternately when pushed. [RTTY/PSK] ➥ Selects RTTY and PSK modes alternately when pushed. ➥ Switches RTTY and RTTY-R (RTTY reverse) mode when pushed and held for 1 sec. in RTTY mode. ➥ Switches PSK and PSK-R (PSK reverse) mode when pushed and held for 1 sec. in PSK mode. [AM/FM] ➥ Selects AM and FM modes alternately. ➥ Selects AM or FM data mode (AM-D/FM-D) when pushed and held for 1 sec. in AM or FM mode, respectively. • In AM or FM data mode, push to return to AM or FM mode, respectively. ➥ Switches D1, D2 and D3 when pushed and held for 1 sec. in AM or FM data mode. @2 FILTER SWITCH [FILTER] (p. 76) ➥ Push to select one of 3 IF filter settings. ➥ Push and hold for 1 sec. to display the filter set screen. @3 EXIT/SET SWITCH [EXIT/SET] ➥ Push to exit, or return to the previous screen indication during spectrum scope, memory, scan or set mode screen display. ➥ Push and hold for 1 sec. to display the set mode menu screen. @4 V OICE MEMORY RECORD SWITCH [REC] (p. 91) ➥ Push to record the previous received signal for the preset time period. • The preset time period can be set in voice set mode. (p. 97) ➥ Push and hold for 1 sec. to record the received signal until the recording is cancelled. • Push this switch momentarily to stop recording. • The memory records the latest 30 sec. of audio. @5 V OICE MEMORY PLAYBACK SWITCH [PLAY] (p. 92) ➥ Push to playback the previously recorded audio for the preset time period. ➥ Push and hold for 1 sec. to playback all of the previously recorded audio. @6 A UTOMATIC TUNING SWITCH [AUTO TUNE] (p. 83) Turns the automatic tuning function ON and OFF in CW and AM modes. IMPORTANT! When receiving a weak signal, or receiving a signal with interference, the automatic tuning function may tune the receiver to an undesired signal. @7 MAIN DIAL Changes the displayed frequency, selects set mode setting, etc. @8 SPEECH/LOCK SWITCH [SPEECH/LOCK] ➥ Push to announce the S-meter indication, the displayed frequency and the operating mode. (p. 35) • The parameters to be announced can be selected in the others set mode. (p. 131) ➥ Push and hold for 1 sec. to turn the dial lock function ON and OFF. (p. 82) • The dial lock function electronically locks the main dial. • The lock indicator lights while the dial lock function is activated. NOTE: The [SPEECH/LOCK] switch operation to activate the voice synthesizer or the dial lock functions can be replaced in others set mode. (p. 131) @9 RIT/∂TX CONTROL [RIT/∂TX] (pgs. 73, 87) Shifts the receive and/or transmit frequency with- out changing the transmit and/or receive frequency shown on the main VFO while the RIT and/or ∂TX functions are/is ON. • Rotate the control clockwise to increase the frequency, or rotate the control counterclockwise to decrease the frequency. The RIT or ∂TX functions must be ON. • The shift frequency range is ±9.999 kHz in 1 Hz steps (or ±9.99 kHz in 10 Hz steps). High shift Low shift 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Section	Page
Front cover	1
FOREWORD	2
IMPORTANT	2
EXPLICIT DEFINITIONS	2
SUPPLIED ACCESSORIES	2
FCC INFORMATION	2
PRECAUTIONS	3
TABLE OF CONTENTS	4
1 PANEL DESCRIPTION	8
■ Front panel	8
■ Rear panel	18
■ LCD display	20
■ Screen menu arrangement	22
2 INSTALLATION AND CONNECTIONS	23
■ Unpacking	23
■ Selecting a location	23
■ Grounding	23
■ Antenna connection	23
■ Required connections	24
◇ Front panel	24
◇ Rear panel	24
■ Advanced connections	25
◇ Front panel	25
◇ Rear panel— 1	25
◇ Rear panel— 2	26
■ USB connection	26
■ Power supply connections	27
■ External antenna tuner connection	27
■ Linear amplifier connections	28
◇ Connecting the IC-PW1/EURO	28
◇ Connecting a non-Icom linear amplifier	28
■ Transverter jack information	29
■ FSK and AFSK (SSTV) connections	29
◇ FSK operation— when connecting to [ACC 1]	29
◇ AFSK operation	29
◇ When connecting to the [USB] connector	29
■ Microphone connector information	30
■ Microphones	30
◇ HM-36	30
◇ SM-50 (Option)	30
■ Accessory connector information	31
3 BASIC OPERATION	32
■ Before first applying power	32
■ Applying power (CPU resetting)	32
■ Selecting VFO/memory mode	33
■ Main/Sub band selection	33
◇ Main/Sub band switching	33
◇ Main/Sub band equalization	33
■ Selecting an operating band	34
◇ Using the band stacking registers	34
■ Frequency setting	35
◇ Tuning with the main dial	35
◇ Direct frequency entry with the keypad	35
◇ About 5 MHz band operation (USA version only)	36
◇ Quick tuning step	36
◇ Selecting “kHz” step	36
◇ Selecting 1 Hz step	37
◇ Auto tuning step function	37
◇ 1⁄4 tuning step function	37
◇ Band edge warning beep	38
■ Operating mode selection	39
■ Squelch and receive (RF) sensitivity	40
■ Volume setting	41
■ Meter indication selection	41
◇ Multi-function digital meter	41
◇ Meter type selection	42
■ Voice synthesizer operation	42
■ Basic transmit operation	43
◇ Transmitting	43
◇ Microphone gain adjustment	43
◇ Drive gain adjustment	44
◇ Drive gain adjustment	44
4 RECEIVE AND TRANSMIT	45
■ Functions for CW operation	45
◇ About CW reverse mode	45
◇ About CW pitch control	45
◇ CW sidetone function	45
◇ APF (Audio Peak Filter) operation	46
■ Electronic keyer functions	47
◇ Memory keyer screen	48
◇ Editing a memory keyer	49
◇ Contest number set mode	50
◇ Keyer set mode	51
■ RTTY (FSK) operation	53
◇ About RTTY reverse mode	54
◇ Twin peak filter	54
◇ Functions for the RTTY decoder indication	55
◇ Setting the decoder threshold level	55
◇ RTTY memory transmission	56
◇ Automatic transmission/reception setting	56
◇ Editing RTTY memory	57
◇ RTTY decode set mode	58
◇ Data saving	60
■ PSK operation	61
◇ About BPSK and QPSK modes	62
◇ Functions for the PSK decoder indication	63
◇ Setting the decoder threshold level	63
◇ PSK memory transmission	64
◇ Automatic transmission/reception setting	64
◇ Editing PSK memory	65
◇ PSK decode set mode	66
◇ Data saving	68
■ Repeater operation	69
◇ Repeater access tone frequency setting	69
■ Tone squelch operation	70
■ Data mode (AFSK) operation	71
■ Spectrum scope screen	72
◇ Center mode	72
◇ Fixed mode	73
◇ Mini scope screen indication	74
◇ Scope set mode	74
■ Preamplifier	79
■ Attenuator	79
■ RIT function	80
◇ RIT monitor function	80
■ AGC function	81
◇ Selecting the preset value	81
◇ Setting the AGC time constant preset value	81
■ Twin PBT operation	82
■ IF filter selection	83
◇ IF filter selection	83
◇ Filter passband width setting (except FM mode)	83
◇ Roofing filter selection	84
◇ DSP filter shape	84
◇ Filter shape set mode	85
■ Dualwatch operation	86
■ Noise blanker	88
◇ NB set mode	88
■ Noise reduction	89
■ Dial lock function	89
■ Notch function	90
■ Autotune function	90
■ VOX function	91
◇ Using the VOX function	91
◇ Adjusting the VOX function	91
■ Break-in function	92
◇ Semi break-in operation	92
◇ Full break-in operation	92
■ Speech compressor	93
■ Transmit filter width setting	93
■ ⊿TX function	94
◇ ⊿TX monitor function	94
■ Monitor function	94
■ Split frequency operation	95
■ Quick split function	96
◇ Split lock function	96
5 VOICE RECORDER FUNCTIONS	97
■ About digital voice recorder	97
■ Recording a received audio	98
◇ Basic recording	98
◇ One-touch recording	98
■ Playing the recorded audio	99
◇ Basic playing	99
◇ One-touch playing	99
■ Protect the recorded contents	100
■ Erasing the recorded contents	100
■ Recording a message for transmit	101
◇ Recording	101
◇ Confirming a message for transmit	101
■ Programming a memory name	102
■ Sending a recorded message	103
◇ Transmit level setting	103
■ Voice set mode	104
■ Saving a voice message into the USB-Memory	105
◇ Saving the received audio memory	105
◇ Saving the TX memory	105
6 MEMORY OPERATION	106
■ Memory channels	106
■ Memory channel selection	106
◇ Using the [▲]/[▼] keys	106
◇ Using the keypad	106
■ Memory list screen	107
◇ Selecting a memory channel using the memory list screen	107
◇ Confirming programmed memory channels	107
■ Memory channel programming	108
◇ Programming in VFO mode	108
◇ Programming in memory mode	108
■ Frequency transfers	109
◇ Transferring in VFO mode	109
◇ Transferring in memory mode	109
■ Memory names	110
◇ Editing (programming) memory names	110
■ Memory clearing	110
■ Memo pads	111
◇ Writing frequencies and operating modes into memo pads	111
◇ Calling up a frequency from a memo pad	111
7 SCANS	112
■ Scan types	112
■ Preparation	112
■ Scan set mode	113
■ Programmed scan operation	114
■ ⊿F scan operation	114
■ Fine programmed scan/Fine ⊿F scan	115
■ Memory scan operation	116
■ Select memory scan operation	116
■ Setting select memory channels	117
◇ Setting in scan screen	117
◇ Setting in memory list screen	117
◇ Erasing the select scan setting	117
■ Tone scan	118
8 ANTENNA TUNER OPERATION	119
■ Automatic antenna selection	119
■ Antenna tuner operation	120
◇ Tuner operation	120
◇ Manual tuning	120
■ Optional external tuner operation	121
9 CLOCK AND TIMERS	122
■ Clock set mode	122
■ Daily timer setting	123
■ Setting sleep timer	124
■ Timer operation	124
10 SET MODE	125
■ Set mode description	125
◇ Set mode operation	125
◇ Screen arrangement	126
■ Level set mode	127
■ ACC set mode	131
■ Display set mode	133
■ Others set mode	135
■ USB-Memory set menu	143
◇ USB-Memory set screen arrangement	143
■ File loading	144
◇ Load option set mode	145
■ File saving	146
◇ Save option set mode	147
■ Changing a file name	148
■ Deleting a file	149
■ Unmounting USB-Memory	149
■ Formatting the USB-Memory	150
11 MAINTENANCE	151
■ Troubleshooting	151
◇ Transceiver power	151
◇ Transmit and receive	151
◇ Scanning	152
◇ Display	152
◇ Format USB-Memory	152
■ Main dial brake adjustment	152
■ SWR reading	153
■ Screen type and font selections	153
■ Frequency calibration (approximate)	154
■ Opening the transceiver’s case	155
■ Clock backup battery replacement	155
■ Fuse replacement	156
◇ DC power cable fuse replacement	156
◇ Circuitry fuse replacement	156
■ Resetting the CPU	156
■ About protection indications	157
■ Screen saver function	157
12 CONTROL COMMAND	158
■ Remote jack (CI-V) information	158
◇ CI-V connection example	158
◇ Data format	158
◇ Command table	159
◇ Data content description	164
13 SPECIFICATIONS AND OPTIONS	167
■ General	167
■ Transmitter	167
■ Receiver	167
■ Antenna tuner	167
■ Options	168
14 UPDATING THE FIRMWARE	169
■ General	169
■ Caution	169
■ Preparation	170
◇ Firmware and firm utility	170
◇ File downloading	170
■ Firmware update	171
15 CE	173

Match case Limit results 1 per page

MODE SWITCHES

Selects the des±red mode. (p. 32)

•

Announces the selected mode v±a the speech synthe-

s±zer. (p. 35)

[SSB]

➥

Selects USB and LSB modes alternately when

pushed.

➥

Selects SSB data mode (USB-D, LSB-D) when

pushed and held for 1 sec. ±n SSB mode.

• In SSB data mode, push to return to SSB mode.

➥

Sw±tches D1, D2 and D3 when pushed and held

for 1 sec. ±n SSB data mode.

[CW]

Selects CW and CW-R

(CW reverse)

modes alter-

nately when pushed.

[RTTY/PSK]

➥

Selects RTTY and PSK modes alternately when

pushed.

➥

Sw±tches RTTY and RTTY-R (RTTY reverse)

mode when pushed and held for 1 sec. ±n RTTY

mode.

➥

Sw±tches PSK and PSK-R (PSK reverse) mode

when pushed and held for 1 sec. ±n PSK mode.

[AM/FM]

➥

Selects AM and FM modes alternately.

➥

Selects AM or FM data mode (AM-D/FM-D)

when pushed and held for 1 sec. ±n AM or FM

mode, respect±vely.

•

In AM or FM data mode, push to return to AM or

FM mode, respect±vely.

➥

Sw±tches D1, D2 and D3 when pushed and held

for 1 sec. ±n AM or FM data mode.

FILTER SWITCH [FILTER]

(p. 76)

➥

Push to select one of 3 IF ﬁlter sett±ngs.

➥

Push and hold for 1 sec. to d±splay the ﬁlter set

screen.

EXIT/SET SWITCH [EXIT/SET]

➥

Push to ex±t, or return to the prev±ous screen ±n-

d±cat±on dur±ng spectrum scope, memory, scan

or set mode screen d±splay.

➥

Push and hold for 1 sec. to d±splay the set mode

menu screen.

VOICE MEMORY RECORD SWITCH [REC]

(p. 91)

➥

Push to record the prev±ous rece±ved s±gnal for

the preset t±me per±od.

•

The preset t±me per±od can be set ±n vo±ce set mode.

(p. 97)

➥

Push and hold for 1 sec. to record the rece±ved

s±gnal unt±l the record±ng ±s cancelled.

• Push th±s sw±tch momentar±ly to stop record±ng.

• The memory records the latest 30 sec. of aud±o.

VOICE MEMORY PLAYBACK SWITCH [PLAY]

(p. 92)

➥

Push to playback the prev±ously recorded aud±o

for the preset t±me per±od.

➥

Push and hold for 1 sec. to playback all of the

prev±ously recorded aud±o.

AUTOMATIC TUNING SWITCH [AUTO TUNE]

(p. 83)

Turns the automat±c tun±ng funct±on ON and OFF ±n

CW and AM modes.

IMPORTANT!

When rece±v±ng a weak s±gnal, or rece±v±ng a s±g-

nal w±th ±nterference, the automat±c tun±ng func-

t±on may tune the rece±ver to an undes±red s±gnal.

MAIN DIAL

Changes the d±splayed frequency, selects set

mode sett±ng, etc.

SPEECH/LOCK SWITCH [SPEECH/LOCK]

➥

Push to announce the S-meter ±nd±cat±on, the

d±splayed frequency and the operat±ng mode.

(p. 35)

•

The parameters to be announced can be selected ±n

the others set mode. (p. 131)

➥

Push and hold for 1 sec. to turn the d±al lock

funct±on ON and OFF.

(p. 82)

• The d±al lock funct±on electron±cally locks the ma±n

d±al.

• The lock ±nd±cator l±ghts wh±le the d±al lock funct±on

±s act±vated.

NOTE:

The

[SPEECH/LOCK]

sw±tch operat±on

to act±vate the vo±ce synthes±zer or the d±al lock

funct±ons can be replaced ±n others set mode.

(p. 131)

RIT/

∂

TX CONTROL [RIT/

∂

TX]

(pgs. 73, 87)

Sh±fts the rece±ve and/or transm±t frequency w±th-

out chang±ng the transm±t and/or rece±ve frequency

shown on the ma±n VFO wh±le the RIT and/or

∂

funct±ons are/±s ON.

•

Rotate the control clockw±se to ±ncrease the frequency,

or rotate the control counterclockw±se to decrease the

frequency. The RIT or

∂

TX funct±ons must be ON.

•

The sh±ft frequency range ±s ²9.999 kHz ±n 1 Hz steps

(or ²9.99 kHz ±n 10 Hz steps).

Low shift

High shift

PANEL DESCRIPTION