Icom IC-7600 Instruction Manual - Page 124

9 CLOCK AND TIMERS ■ Setting sleep timer TIMER POWER SET / SLEEP F-6 F-2 TIMER F-4 EXIT/SET Main dial TIME / CLR • Sleep timer set condition The sleep timer turns the transceiver power OFF automatically after passing the set period. The timer can be set to 5-120 min. in 5 min. steps. The sleep timer function counts the 'minute' units, and does not count the 'second' units. For example, when the sleep timer is started at 12:00 59, First one minute past for just 1 sec. The maximum error is therefore 59 sec. This is normal, not a malfunction. q P ush [EXIT/SET] several times to close multi-function screen, if necessary. w Push [SET] (F-6) to select set mode menu screen. e Push [TIME] (F-4) to select time set mode. r Push [TIMER] (F-2) to select timer set mode. t P ush [SLEEP] (F-6) to select the sleep timer set condition blinks. y S et the desired time period using the main dial. • "TIMER-set Push [SET]" blinks. • Push [CLR] (F-4) to select "- - -" to cancel the setting. u Push [SET] (F-6) to set the time. • Push [EXIT/SET] to cancel the setting. • The timer indicator appears. i Push [EXIT/SET] to exit timer set screen. o T he transceiver emits 10 beeps and turns OFF after the sleep timer period elapses. • The timer indicator blinks while beeping. • Push [POWER] momentarily to cancel the sleep timer, if desired. ■ Timer operation TIMER POWER Appears q P reset the daily timer as described on previously to turn the timer function ON. • The timer indicator appears. w P ush and hold [POWER] for 1 sec. to turn the power OFF. • The indicator on this switch lights red when the timer function is ON. e W hen the set time arrives, the power is automatically turned ON. r T he transceiver emits 10 beeps and turns OFF after the power-off period elapses. • The timer indicator blinks while beeping. • Push [POWER] momentarily to turn the timer function OFF, if desired. Timer action in the timer set screen must be selected ON to enable timer operation, described in page 116 step y. 117