Icom IC-7600 Instruction Manual - Page 44
◇ Drive gain adjustment, EXIT/SET], SET] F-6, LEVEL] F-1, METER] MF2, TRANSMIT]
View all Icom IC-7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
3 BASIC OPERATION D Drive gain adjustment The drive gain is active for all modes other than SSB mode with speech compressor OFF. Before transmitting, monitor your selected operating frequency to make sure transmitting won't cause interference to other stations on the same frequency. q P ush [EXIT/SET] several times to return to normal screen, if necessary. w P ush [SET] (F-6), then push [LEVEL] (F-1) to select level set mode. e P ush [Y] (F-1) or [Z] (F-2) to select "Drive Gain" item. r Push [METER] (MF2) to select the ALC meter. t P ush [PTT] (microphone; SSB with [COMP] ON, AM or FM), key down (CW) or push [TRANSMIT] (RTTY or PSK) to transmit. y W hile talking into the microphone, keying down or transmitting, rotate the main dial so that the ALC meter reading is within 30% to 50% of the ALC scale. (p. 36) • Talk into the microphone at your normal voice level. u R elease [PTT], stop keying or push [TRANSMIT] again to return to receive. i Push [EXIT/SET] to exit display set mode. SET TRANSMIT METER F-6 F-1 LEVEL / F-2 EXIT/SET Main dial Drive gain range 37