Home » Konica Minolta Manuals » Multifunction Devices » Konica Minolta bizhub C360 » Manual Viewer

Konica Minolta bizhub C360 bizhub C220/C280/C360 Security Operations User Guid - Page 116

Enter the correct Account Password.

View all Konica Minolta bizhub C360 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 116 highlights

3.1 User Authentication Function 3 12 Enter the 8-digit Account Password from the keyboard or keypad. % Press the [C] key to clear all characters. % Touch [Delete] to delete the last character entered. % Touch [Shift] to show the upper case/symbol screen. % Touch [Cancel] to go back to the screen shown in step 11. 13 Touch [OK]. 14 Press [Access] or touch [Login]. If documents are stored in the ID & Print User Box, the login method selected in step 7 will appear. Select the login method displayed on the screen. % If a wrong Account Name is entered, a message appears that tells that authentication has not been successful. The machine then prohibits entry for Account authentication for 5 sec. and then causes the screen of step 1 to reappear. Perform Account authentication once again. % If there is a mismatch of Account Password relative to the registered Account Name, a message appears that tells that authentication has not been successful. The machine then prohibits entry of Account Name and Account Password for 5 sec. and then causes the screen of step 11 to reappear. Enter the correct Account Password. % If the Enhanced Security Mode is set to [ON], the entry of a wrong Account Password is counted as unauthorized access. If a wrong Account Password for the corresponding Account Name entered is entered a predetermined number of times (once to three times) or more set by the Administrator of the machine, a message appears that tells that authentication has not been successful for any subsequent operation for authentication. The machine is then set into an access lock state, rejecting any more logon attempts. To cancel the access lock state, the Administrator of the machine must perform the Release Setting. Contact the Administrator of the machine. 15 Pressing the [Access] key will show the following screen. To log off, select [Log off]. bizhub C360/C280/C220 3-6

Section	Page
Contents	2
1 Security	6
1.1 Introduction	6
Compliance with the ISO15408 Standard	6
Operating Precautions	6
INSTALLATION CHECKLIST	7
1.2 Security Functions	8
Check Count Clear Conditions	8
1.3 Data to be Protected	9
1.4 Precautions for Operation Control	10
Roles and Requirements of the Administrator	10
Password Usage Requirements	10
Network Connection Requirements for the Machine	11
User information control server control requirements	11
Security function operation setting operating requirements	11
Operation and control of the machine	11
Machine Maintenance Control	11
1.5 Miscellaneous	12
Password Rules	12
Precautions for Use of Various Types of Applications	12
Encrypting communications	13
IPP printing	13
Items of Data Cleared by Overwrite All Data Function	14
Fax functions	15
Bluetooth communication	15
2 Administrator Operations	17
2.1 Accessing the Administrator Settings	17
2.1.1 Accessing the Administrator Settings	17
2.1.2 Accessing the User Mode	19
2.2 Enhancing the Security Function	23
2.2.1 Items cleared by HDD Format	25
2.2.2 Setting the Enhanced Security Mode	25
2.3 Preventing Unauthorized Access	28
Setting Prohibited Functions When Authentication Error	28
2.4 Canceling the Operation Prohibited State	30
Performing Release Setting	30
2.5 Setting the Authentication Method	32
2.5.1 Setting the Authentication Method	32
2.5.2 Setting the External Server	34
2.6 ID & Print Setting Function	36
Setting ID & Print	36
2.7 System Auto Reset Function	38
Setting the System Auto Reset function	38
2.8 User Setting Function	40
Making user setting	40
2.9 Account Track Setting Function	46
Making account setting	46
2.10 User Box Function	51
2.10.1 Setting the User Box	51
2.10.2 Changing the user attributes and account attributes	57
2.11 Changing the Administrator Password	63
Changing the Administrator Password	63
2.12 Protecting Data in the HDD	65
2.12.1 Setting the Encryption Key (encryption word)	65
2.12.2 Changing the Encryption Key	70
2.13 Overwrite All Data Function	72
Setting the Overwrite All Data function	72
2.14 SSL Setting Function	74
2.14.1 Device Certificate Setting	74
2.14.2 SSL Setting	76
2.14.3 Removing a Certificate	77
2.15 S/MIME Communication Setting Function	78
2.15.1 Setting the S/MIME Communication	78
2.15.2 Registering the certificate	82
2.16 SNMP Setting Function	84
2.16.1 Changing the auth-password and priv-password	84
2.16.2 SNMP access authentication function	91
2.16.3 SNMP v3 setting function	91
2.16.4 SNMP network setting function	92
2.17 WebDAV Function	93
Setting the WebDAV Server Password	93
2.18 PC-Fax RX Setting Function	97
PC-Fax RX Setting	97
2.19 TSI User Box Setting Function	101
TSI User Box Setting	101
2.20 TCP/IP Setting Function	105
2.20.1 Setting the IP Address	105
2.20.2 Registering the DNS Server	106
2.21 NetWare Setting Function	107
Making the NetWare Setting	107
2.22 SMB Setting Function	108
Setting the NetBIOS Name	108
2.23 AppleTalk Setting Function	109
Making the AppleTalk Setting	109
2.24 E-Mail Setting Function	110
Setting the SMTP Server (E-Mail Server)	110
3 User Operations	112
3.1 User Authentication Function	112
3.1.1 Performing user authentication	112
3.1.2 Accessing the ID & Print Document	120
3.2 Change Password Function	122
Performing Change Password	122
3.3 Secure Print Function	125
Accessing the Secure Print Document	125
3.4 User Box Function	128
3.4.1 Setting the User Box	128
3.4.2 Changing the User Box Password and user attributes and account attributes	134
3.4.3 Accessing the User Box and User Box file	142
3.4.4 Sending S/MIME box files	146
4 Application Software	149
4.1 PageScope Data Administrator	149
4.1.1 Accessing from PageScope Data Administrator	149
4.1.2 Setting the user authentication method	151
4.1.3 Changing the authentication mode	153
4.1.4 Making the user settings	156
4.1.5 Making the account settings	157
4.1.6 Registering the certificate	158
4.1.7 SNMP Setting Function	160
4.1.8 DNS Server Setting Function	162
4.1.9 NetWare Setting Function	163
4.1.10 SMB Setting Function	164
4.1.11 AppleTalk Setting Function	165
4.1.12 E-Mail Setting Function	166
4.2 PageScope Box Operator	167
4.2.1 Accessing the User Box	167
4.2.2 Creating a User Box	169
4.2.3 Changing the User Box properties (user attributes, account attributes)	170
4.2.4 Accessing the User Box file	172
4.3 HDD TWAIN driver	173
Accessing from the HDD TWAIN driver	173
4.4 PageScope Direct Print	175
Printing through PageScope Direct Print	175
4.5 HDD Backup Utility	177
4.5.1 Backup	177

Match case Limit results 1 per page

bizhub C360/C280/C220

3-6

3.1

User Authentication Function

Enter the 8-digit Account Password from the keyboard or keypad.

Press the [C] key to clear all characters.

Touch [Delete] to delete the last character entered.

Touch [Shift] to show the upper case/symbol screen.

Touch [Cancel] to go back to the screen shown in step 11.

Touch [OK].

Press [Access] or touch [Login]. If documents are stored in the ID & Print User Box, the login method

selected in step 7 will appear. Select the login method displayed on the screen.

If a wrong Account Name is entered, a message appears that tells that authentication has not been

successful. The machine then prohibits entry for Account authentication for 5 sec. and then causes

the screen of step 1 to reappear. Perform Account authentication once again.

If there is a mismatch of Account Password relative to the registered Account Name, a message

appears that tells that authentication has not been successful. The machine then prohibits entry of

Account Name and Account Password for 5 sec. and then causes the screen of step 11 to reappear.

Enter the correct Account Password.

If the Enhanced Security Mode is set to [ON], the entry of a wrong Account Password is counted as

unauthorized access. If a wrong Account Password for the corresponding Account Name entered

is entered a predetermined number of times (once to three times) or more set by the Administrator

of the machine, a message appears that tells that authentication has not been successful for any

subsequent operation for authentication. The machine is then set into an access lock state, rejecting

any more logon attempts. To cancel the access lock state, the Administrator of the machine must

perform the Release Setting. Contact the Administrator of the machine.

Pressing the [Access] key will show the following screen.

To log off, select [Log off].