Konica Minolta bizhub C650 bizhub C650 Network Scanner Operations User Guide - Page 136
FTP
View all Konica Minolta bizhub C650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Specifying Utility mode parameters 3 - The icons are used in the image panel function which can be operated when the optional i-Option LK-101 or i-Option LK-103 is installed. 19 Touch [OK], and then touch [OK] in the next screen that appears. The SMB destination is registered. ! Detail To check a registered destination, select it, and then touch [Check Job Set.]. To change the settings for a registered destination, select it, and then touch [Edit]. The registration number cannot be changed in the Edit screen. To delete a registered destination, select it, and then touch [Delete]. If the computers or workgroups on the network (subnet) that this machine belongs to is more than the numbers listed below, browsing over the network may not be performed correctly. Workgroups: 128 Computers: 128 Also, browsing is not available in the IPv6 environment. 2 Note The registration cannot be completed if no settings are specified for "Name", "Host Address" and "File Path". To cancel the registration, touch [Cancel]. To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears. FTP Settings can be specified for the following for the FTP destination to be registered. Parameter No. Name Host Address File Path User ID Password anonymous Description Type in the registration number (between 1 and 2000) for the address book destination. If nothing is entered when [OK] is touched, the destination is registered with the lowest available number. Type in a name of 24 characters or less for the registered destination. Type in the host address in the format of a host name, IPv4 address or IPv6 address. For a host name, type in 63 characters or less. Type in 96 characters or less for the path to the saved file. Type in 47 characters or less for the user ID for logging onto the host computer. Type in 31 characters or less for the password for logging onto the host computer. To specify no user ID for logging onto the host computer, touch [ON]. C650 3-15