Konica Minolta bizhub C650 bizhub C650 Network Scanner Operations User Guide - Page 234
E-Mail TX (SMTP
View all Konica Minolta bizhub C650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
Network Settings 4 4.9 E-Mail TX (SMTP) Information, such as the SMTP server, that is required to send data as an e-mail attachment in Scan mode can be specified. In addition, authentication settings can be specified for e-mail transmission. Settings can be specified for the following. ! Detail For sending e-mail, administrator address must be specified on this machine. For details on the administrator address setting, refer to the User's Guide [Copy Operations]. E-Mail TX (SMTP) screen 1/5 Parameter Scanning Status Notification Total Counter Notification Description Select whether or not Scan to E-Mail operations are used. Select whether or not status notification is used. Select whether or not total counter notification is used. E-Mail TX (SMTP) screen 2/5 Parameter SMTP Server Address Description Specify the address of the SMTP server used to send e-mail messages. For details, refer to "SMTP Server Address" on page 4-58. E-Mail TX (SMTP) screen 3/5 Parameter Binary Division Divided Mail Size Description Specify whether or not a large e-mail message is divided and sent in small sections. This is used to send data that has exceeded the maximum capacity when the maximum capacity is limited per e-mail message on the e-mail server. Specify the size of divided data when dividing the data to be sent. To change the setting, press the [C] (clear) key, and then use the keypad to type in the desired setting. (Range: 100 to 15000 KB) 2 Note It may not be possible to read the e-mail messages if the e-mail software used to receive e-mail is not equipped with a restoring function. E-Mail TX (SMTP) screen 4/5 Parameter Connection Timeout Server Capacity Description If transmission stops while an e-mail message is being sent to the SMTP server, the email transmission operation is automatically aborted after a specified length of time has passed. Specify the length of time from the point when the transmission stops to the point when the transmission operation is to be aborted. To change the setting, touch [+] or [-] to specify the setting (in 30-second increments). (Range: 30 to 300 seconds) Specify the maximum capacity that the SMTP server can receive per e-mail message. To change the setting, press the [C] (clear) key, and then use the keypad to type in the desired setting. (Range: 1 to 100 Mbyte) To apply no limit, touch [No Limit]. E-Mail TX (SMTP) screen 5/5 Parameter SSL Setting Port Number Description In order to apply SSL/TLS encryption to communications between this machine and the SMTP server, select "SMTP over SSL" or "Start TLS". Specify the port number if "Start TLS" was selected. To change the setting, touch [Input], press the [C] (clear) key, and then use the keypad to type in the desired port number. (Range: 1 to 65535) C650 4-54