Konica Minolta bizhub C650 bizhub C650 Network Scanner Operations User Guide - Page 183
Network settings with external server authentication, When SSL is installed
View all Konica Minolta bizhub C650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Network Settings 4 4.2 Network settings with external server authentication In order to use an external server to perform user authentication, various settings must be specified according to the server to be used. Specify the settings according to the procedures described below. Specify the external server authentication settings according to the network environment being used. Setting Active Directory NTLM v1 NTLM v2 NDS LDAP Description (reference) Select this setting when using Window 2000 Server or 2003 Server. Select this setting when using Window NT 4.0 Server. NTLMv2 is applied from Windows NT 4.0 (Service Pack 4). Select this setting when using NetWare 5.1 or NetWare 6.0. Select this setting when using an LDAP server. ! Detail If "Active Directory" was selected for external server authentication, specify a password of one or more characters. If no password is specified, authentication will fail. Do not use """ or "+" in the external server password. For details on the operating conditions of the external server, contact the network administrator. If "Password Rules" is set to "Enable", only a password with 8 digits can be specified. For details on the password rules, refer to the User's Guide [Copy Operations]. A maximum of 20 external servers can be registered. If external server authentication was selected, [Server Name] appears in the user authentication screen so that logon is possible by selecting a server from those that are registered. 2 Note The specifications of the operating system may have changed, or a new operating system may have been released. For details, refer to the manual for the operating system. When SSL is installed If external server authentication is specified while SSL is installed, "TCP Socket Settings" changes to "Screen of the SSL Settings". After specifying settings for external server authentication, be sure to turn the machine off, then on again. Using Active Directory Before performing the operation, make sure that the following information is available. - Administrator password (required) - IP address of this machine (required) - Subnet mask (required) - Default gateway - Priority DNS server address (required) - Alternate DNS server address 1 - Alternate DNS server address 2 - Default DNS domain name - DNS host name - Default domain name for Active Directory (required) - IP address of the NTP server (time adjustment) - List of users for authentication (required) 1 Display the Administrator Settings screen. - For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator Settings screen" on page 3-5. C650 4-3