Konica Minolta bizhub C650 bizhub C650 Network Scanner Operations User Guide - Page 159
TWAIN Lock Time
View all Konica Minolta bizhub C650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Specifying Utility mode parameters 3 TWAIN Lock Time Specify the length of time until the machine's operations are unlocked during scanning (except with PUSH scanning). (The default setting is 120 seconds.) 1 Touch [4 Scan/Fax Settings] in the User Settings screen. - For details on displaying the User Settings screen, refer to "Displaying the User Settings screen" on page 3-4. 2 Touch [TWAIN Lock Time]. 3 Press the [C] (clear) key to erase the value, and then use the keypad to specify the desired length of time (between 30 and 300 seconds). - If a value outside the allowable range is specified, the message "Input error" appears. Type a value within the allowable range. 4 Touch [OK]. The TWAIN lock time is set. 2 Note To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears. If optional image controller IC-409 has been installed, this parameter is not available. If access to this machine using KONICA MINOLTA TWAIN, control panel is locked. It is automatically unlocked at the specified time. C650 3-38