Konica Minolta bizhub C754 bizhub C654/C754 Copy Operations User Guide - Page 11

1.1 Making a copy (Basic operation flow) 1 % For details on copy settings, refer to the respective columns of the following table. Purpose To copy by specifying the color, image quality, density, etc. To print on both sides of paper or combine pages, and save the number of sheets To change the paper size or type of the paper to be copied To staple printed copies or create a booklet To copy various types of originals, such as card and magazine To adjust the layout such as specifying the zoom ratio and creating a poster To insert a cover sheet or blank sheet into copied documents To add the date, page number, stamp, etc. on copied documents To remove an unnecessary portion of the original To prohibit unauthorized copying To save originals on the hard disk (user box) of this machine Reference page 3-2 page 4-2 page 5-2 page 6-2 page 8-2 page 9-2 page 10-2 page 11-2 page 12-2 page 13-2 page 14-2 4 If necessary, specify the number of copies using the Keypad. % To use the Keypad, slide the Control Panel to the left. % If the [10 Keypad] is assigned to the Register key, pressing the Register key enables you to display the Keypad on the Touch Panel to enter data. % To retype the number of copies, press C (Clear). 5 Press the Start key. % If desired, tap [Check Setting] before starting a copy, and check the settings. The original is scanned and copy begins. % If you press the Stop key while scanning or printing an original, processing is stopped, and a list of inactive jobs is displayed. To perform processing again, delete the inactive jobs from the list. % If [Ready to accept another job.] appears while printing a job, you can scan the next original. Related setting - You can change the default copy settings to suit your environment. For details, refer to page 16-11. bizhub C754/C654 1-3