Konica Minolta bizhub C754 bizhub C654/C754 Copy Operations User Guide - Page 150
[Power Supply/Power Save Settings], Power, Settings, Description, Touch Panel, Control Panel
View all Konica Minolta bizhub C754 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
17 [Power Supply/Power Save Settings] To display: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] Configure the settings on how to use the Power key and the machine action in the power save mode. Settings [Low Power Mode Settings] [Sleep Mode Settings] [Power Key Setting] [Power Save Settings] [Enter Power Save Mode] [Power Consumption in Sleep Mode] [Power Saving Fax/Scan] Description Change the time to elapse before entering the Low Power mode after the last action on this machine. In the Low Power mode, the display of the Touch Panel is turned off to reduce power consumption. The default is [15] min. (allowable range: [10] to [240] min.). Change the time period before the machine enters the Sleep mode after the last action is carried out. Sleep mode provides a greater power saving effect than Low Power mode. However, the time required to return to the normal mode is longer than the time required to recover from the Low Power mode. The default is [30] min. (allowable range: [15] to [240] min.). Specify whether to use the Power key on the Control Panel as a sub power off key or power save key. • [Sub Power OFF]: Press the Power key to turn the sub power off. If the Power key is held down, Power Save mode shifts to ErP Auto Power Off mode (close to Main Power Off mode), which offers a higher power saving effect than Sub Power Off mode. • [Power Save]: Press the Power key to shift to Power Save mode (Low Power or Sleep mode). Hold down the Power key to shift to sub power off mode. [Sub Power OFF] is specified by default. Select the type of Power Save mode to enter when the Power key on the Control Panel is pressed if [Power Save] has been selected for [Power Key Setting]. • [Low Power]: Switches to the Low Power mode. Turns off the display of the Touch Panel to reduce power use. • [Sleep]: Switches to the Sleep mode. Sleep mode provides a greater power saving effect than Low Power mode. However, the time required to return to the normal mode is longer than the time required to recover from Low Power mode. [Low Power] is specified by default. Select the timing for the machine to return to the Power Save mode after printing a job it has received in the Power Save mode from a fax machine or computer. • [Normal]: Switches to the Power Save mode based on the time speci- fied in [Low Power Mode Settings] or [Sleep Mode Settings]. • [Immediately]: Switches to the Power Save mode immediately after a print job has ended. [Immediately] is specified by default. Specify whether to reduce the power consumption in the Sleep mode. • [Enable]: Further reduces the power consumption in the Sleep mode. Select [Enable] in normal conditions. • [Disable]: Select this option when a smooth network communication is not established while [Enable] is enabled. [Enable] is specified by default. Specify whether to give priority to power saving when returning from the Sleep or sub power off mode to a mode other than the copy mode. When returning to a non-printing mode such as the Scan/Fax mode, the temperature of the Fusing Unit in this machine is not adjusted, by which power consumption is reduced. You can set this option when you have selected an option other than [Copy] in [Priority Mode] that is selected by [Administrator Settings] - [System Settings] - [Reset Settings] - [System Auto Reset]. • [Power Save]: The temperature of Fusing Unit is not adjusted when the machine returns to the normal mode. • [Standard]: The temperature of Fusing Unit is adjusted when the ma- chine returns to the normal mode. [Standard] is specified by default. bizhub C754/C654 17-4