Konica Minolta bizhub C754 bizhub C654/C754 Copy Operations User Guide - Page 137

16 [Auto Tray Selection Settings] To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings] - [Auto Tray Selection Settings] When you have selected [Auto] in [Paper], select target paper trays for auto tray selection. Also, specify the priority for the paper trays. Settings [Auto Tray Select] [Tray Priority] [Auto Paper Selection Setting] Description When you have selected [Auto] in [Paper], select target paper trays for auto tray selection. The machine selects the tray loaded with optimal paper among the target trays. The trays loaded with normal paper and special paper for 1-sided printing are included in the target. Different default values are available for different options installed on this machine. Specify the priority for feeding paper among the trays selected in [Auto Tray Select]. If paper of the same size is loaded in multiple trays, paper is fed from the tray given higher priority. Different default values are available for different options installed on this machine. If [Auto] is selected for [Paper], you can also specify the trays loaded with [Thin Paper], [User Paper 1], and [User Paper 2] for target trays. Select target paper for auto paper selection, and specify the priority order. For details on User Paper, contact your service representative. [Auto Tray Switch ON/OFF] To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings] - [Auto Tray Switch ON/OFF] When printing originals by specifying a paper tray, select whether to allow auto switching (ATS: auto tray switching) to the paper tray loaded with paper of the same size when the specified tray runs out of paper. [Restrict] is specified by default. [No Matching Paper in Tray Setting] To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings] - [No Matching Paper in Tray Setting] Select the operation to be taken when there is no appropriate sized paper in the specified paper tray. Settings [Stop Printing (Tray Fixed)] [Switch Trays (Tray Priority)] Description The machines stops printing when there is no appropriate sized paper in the specified paper tray. Load paper to the specified paper tray or switch to another paper tray manually. [Stop Printing (Tray Fixed)] is selected by default. When the specified paper tray runs out of paper, the machine switches to the paper tray where paper of the same size is loaded. [Print Lists] To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings] - [Print Lists] Specify the default paper tray and printing method (1-sided or 2-sided) used for printing reports and meter counts. You can temporarily change the settings when printing. The following shows the default functions. - [Paper Tray]: [Tray 1] - [Simplex/Duplex]: [1-Sided] bizhub C754/C654 16-5