Konica Minolta bizhub C754 bizhub C654/C754 Copy Operations User Guide - Page 165
[1st Z-Fold Position Adjustment], [2nd Z-Fold Position Adjustment
View all Konica Minolta bizhub C754 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
17 [1st Z-Fold Position Adjustment] To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment] - [1st Z-Fold Position Adjustment] Use this option to adjust the 1st Z-fold position. Copy after configuration, then repeat adjustments as required. Settings [Paper Size] [Adjust Value] Description Select the size of paper that is used to adjust the fold position. Enter an adjustment value between -12.8 mm and 12.7 mm by tapping [-] and Move the punch position to the right. • [+]: Move the punch position to the left. [0.0 mm] is specified by default. Tips - This item is available if the Z Folding Unit is installed in the optional Finisher FS-535. - Make adjustment while checking paper folded at a displaced position. - The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size. [2nd Z-Fold Position Adjustment] To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment] - [2nd Z-Fold Position Adjustment] Use this option to adjust the 2nd Z-fold position. Copy after configuration, then repeat adjustments as required. Settings [Paper Size] [Adjust Value] Description Select the size of paper that is used to adjust the fold position. Enter an adjustment value between -12.8 mm and 12.7 mm by tapping [-] and Move the punch position to the right. • [+]: Move the punch position to the left. [0.0 mm] is specified by default. bizhub C754/C654 17-19