Konica Minolta bizhub C754 bizhub C654/C754 Copy Operations User Guide - Page 185
[LDAP-IC Card Authentication Setting], Authenti, cation Unit IC card type, Settings, Description
View all Konica Minolta bizhub C754 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
17 [LDAP-IC Card Authentication Setting] To display: [Utility] - [Administrator Settings] - [User Authentication/Account Track] - [General Settings] [LDAP-IC Card Authentication Setting] Configure settings for authentication by the LDAP server using the card ID registered on authentication cards in an environment with IC card-based user authentication implemented by connecting an optional Authentication Unit (IC card type). You can set this option by selecting [External Server Authentication] or [Main + External Server] in [Administrator Settings] - [User Authentication/Account Track] - [General Settings] - [User Authentication] - [General Settings]. Settings [ON]/[OFF] [Setting Up LDAP] [User Name Acquisition] [Timeout] [Search Attribute(s)] [Server Address] [Search Base] [SSL Setting] [Port Number] [Port Number (SSL)] Description Specify whether to enable authentication by the LDAP server using the card ID registered on authentication cards. [OFF] is specified by default. Register the LDAP server to be used for authenticating the user ID of the IC card. Tap [Check Connection] to try connecting to the LDAP server using the entered information and check if the information registered is correct. Tap [Reset All Settings] to reset all the information entered. Select the method for obtaining the user name for logging in to this machine. • [Use Card IC]: Use the card ID on the IC card as the user name. • [Acquiring]: Use the user name obtained from the server. Enter the at- tribute to be searched as the user name (such as "uid") in [User Name Attribute]. [Use Card IC] is specified by default. Change the timeout time of communication with the LDAP server if necessary. [60 second] is specified by default. Enter the search attribute to be used for search of a user using the LDAP server (using up to 64 characters). The attribute must start with an alphabet character. [uid] is specified by default. Enter the LDAP server address. Use one of the following entry formats. • Example of host name entry: "host.example.com" • Example of IP address (IPv4) entry: "192.168.1.1" • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16" Specify the starting point to search for a user to be authenticated (using up to 255 characters). This option also searches in subdirectories under the entered starting point. Example of entry: "cn=users,dc=example,dc=com" Specify whether or not to use SSL for communication with the LDAP server. [OFF] is specified by default. If necessary, change the LDAP server port number. Normally, you can use the original port number. [389] is specified by default. If necessary, change the SSL communication port number. Normally, you can use the original port number. [636] is specified by default. bizhub C754/C654 17-39