Konica Minolta bizhub PRESS C6000 IC-601 Color Centro User Guide - Page 164
Edit the Existing Point Color, Delete the Existing Point Color, Adjust the Profile Curve
View all Konica Minolta bizhub PRESS C6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
11.9 Edit the RGB-CMYK Device Link Profile 11 Edit the Existing Point Color 1 From [Adjustment Point], select the adjustment point (input color) to edit. The input color is displayed on the lower of the Sample Color (below [Result]). 2 From [Effective Range], select the effective range. The color conversion result of the adjusted point is displayed on [Result] and [After adj.]. In addition, the color of [Result] is displayed on the upper-left of the Sample Color and the color of [After adj.] is displayed on the upper-right. % When you select [Narrow], the result of adjustment has influence on the color range which includes only the near colors to the input color. % When you select [Wide], the result of adjustment has influence on the color range which includes the colors which are away from the input color. % When you select [Normal], it has influence on the middle range between [Narrow] and [Wide]. % You can specify [Effective Range] per adjustment point. % The values displayed on [Result] and [After adj.] are the value to which Input curve and color con- version table are applied. (Output curve is not applied to the curve yet.) 3 Enter the value into [Add. Value] to make the value of [After adj.] the target value. % When you discard the setting of [Add. Value], click [Undo] of [Point Color Adjustment]. Delete the Existing Point Color 1 From [Adjustment Point], select the adjustment point (input color) to delete. 2 Click [Delete]. The selected adjustment point is deleted. Adjust the Profile Curve 1 From [Adjustment Curve], select [Input] or [Output]. % When you execute the adjustment of input curve, select [Input]. % When you execute the adjustment of output curve, select [Output]. 2 Select the combination of colors from [Combination]. According to the selection from [Combination], [View] check box per each color and [Adjustment] radio button per each color appear. % When you select [Input], select [R/G/B] or [RGB]. % When you select [Output], select [C/M/Y/K], [CMY/K] or [CMYK]. % When you select [R/G/B] or [C/M/Y/K], you can adjust the profile curves of each color. % When you select [RGB] or [CMYK], you can adjust the consolidated profile curves of RGB or CMYK. % When you select [CMY/K], you can adjust the consolidated profile curve of CMY and the profile curve of K. 3 When you want to display the profile curve of one color, check [View] of that color. % When you want to hide the profile curve of one color, remove the check mark from [View] of that color. 4 When you want to adjust the profile curve of one color, select [Adj.] of that color. % When check mark of [View] for one color was not selected and you select [Adj.] for the same color, [View] is checked automatically. IC-601 11-52