Konica Minolta bizhub PRESS C6000 IC-601 Color Centro User Guide - Page 190
Adjust the Profile Curve
View all Konica Minolta bizhub PRESS C6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
11.12 Edit the CMYK -CMYK Device Link Profile 11 Adjust the Profile Curve 1 From [Adjustment Curve], select [Input] or [Output]. % When you execute the adjustment of input curve, select [Input]. % When you execute the adjustment of output curve, select [Output]. 2 Select the combination of colors from [Combination]. According to the selection from [Combination], [View] check box of each color and [Adj.] radio button of each color appear. % When you select [Input] or [Output], in both cases, select [C/M/Y/K], [CMY/K] or [CMYK]. % When you select [C/M/Y/K], you can adjust the profile curves of each color of CMYK. % When you select [CMYK], you can adjust the consolidated tone profile of CMYK. % When you select [CMY/K], you can adjust the consolidated profile curve of CMY and the profile curve of K. 3 When you want to display the profile curve of one color, check [View] of that color. % When you want to hide the profile curve of one color, remove the check mark from [View] of that color. 4 When you want to adjust the profile curve of one color, select [Adj.] of that color. % When check mark of [View] for one color was not selected and you select [Adj.] for the same color, [View] is checked automatically. 5 To execute the adjustment of the profile curve, you can drag and move the beginning point/ending point (at both ends of the profile curve) and adjustment points (added by the clicking on the profile curve). % The selected adjustment point appears as a small red square. % By clicking [Previous] or [Next], you can switch the point selection to the previous or the next. % You can move the selected point by entering the coordinate values into the input boxes which are on the center of vertical/horizontal axises. % When you want to delete the added point, drag it to the adjacent point or drop it outside of the profile curve area. % When you want to reset the adjusted setting, click [Undo] of [Profile Curve Adjustment]. IC-601 11-78