Kyocera KM-C2030 KM-C3130/C2030 Operation Guide Basic Oper Rev-1B
Kyocera KM-C2030 Manual
View all Kyocera KM-C2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-C2030 manual content summary:
- Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 1
KM-C2030 KM-C3130 OPERATION GUIDE (Basic Operations) 4581-7772-02 Please read the Operation Guide before using the copier. Keep it close to the copier for easy reference. - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 2
1 Before Making Copies 1.1 Introduction 1-2 Structure of the Manual 1-2 1.2 Available Features 1-4 Color Settings 1-4 Sorting 1-4 17 Sleep Mode 1-17 To recover from Sleep mode 1-18 To turn the copier off 1-19 When the copier is turned off 1-19 1.6 Using the Touch Panel 1-20 Description of - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 3
store a non-standard (custom) paper size 3-15 To select a stored non-standard (custom) paper size 3-16 Loading Paper Into the 2nd Drawer or a Paper Feed Unit 3-17 To set the "Specialty Paper" function 3-18 Loading Paper Into the Large Capacity Cabinet 3-19 ii - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 4
Feeding 4-4 4.2 Feeding the Document 4-5 Multi-Sheet Feeding 4-5 To feed documents of mixed sizes 4-8 Manual Feeding 4-10 5 Specifying Copy Settings 5.1 Selecting a Color Setting 5-2 To select the Color setting 5-2 5.2 Selecting a Finishing Setting 5-3 Automatic "Sort"/"Non-Sort" Setting - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 5
Automatically ("Auto Paper" Setting 5-12 Selecting the Paper Manually 5-12 Selecting the Manual Bypass Tray ("Bypass" Setting 5-12 Small-Sized original 5-29 5.8 Selecting a Photo/Density Setting 5-31 Specifying the Image Type ("Photo/Density" Settings 5-32 Specifying the Density Parameters 5- - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 6
Screen 6-14 To increase the priority of (print) a job 6-15 Combine Jobs Screen 6-16 To combine jobs 6-18 UserBox Screen 6-19 To print a job from a user box 6-20 Memory Recall Screen 6-21 To recall a job from the memory 6-22 7 Index 7.1 Index 7-2 v - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 7
following topics, refer to the Administrator Operations volume of this User Manual. 1 Introduction 2 Safety Information 3 Precautions 4 Part Names and Their Functions 5 Utility Mode Operations 6 Touch Panel Messages 7 Troubleshooting 8 Appendix Advanced Operations For details on the following topics - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 8
1Before Making 1 Copies Before Making Copies Chapter 1 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 9
. The Administrator Operations volume of this User Manual contains precautions on the use of this copier. Be sure to read this volume before procedures for replacing parts and supplies, troubleshooting procedures and machine specifications. Before using the copier, be sure to read chapters 1 through - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 10
1.1 Introduction 1 1-3 Before Making Copies Chapter 1 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 11
Before Making Copies Chapter 1 1 1.2 Available Features 1.2 Available Features The main functions available with this machine are described below. Operating procedures are provided in chapter 2 "Basic Copy Operations" and chapter 5 "Specifying Copy Settings". Color Settings "Auto Color" setting G - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 12
Before Making Copies Chapter 1 1.2 Available Features 1 Finishing Settings Stapling Copies are stapled together before they are fed out. Stapling is only available if the optional finisher (DF-625 or DF-620) is installed. Hole-punching Holes are punched in copies before they are fed out. Hole- - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 13
" setting G This setting automatically selects the most appropriate paper size based on the size of the document loaded and the specified zoom ratio. Manual paper selection G The tray or drawer containing the appropriate paper that you wish to use can be selected. "Bypass" setting G Copies can be - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 14
-sided copies Select this setting to make single-sided copies. Automatic double-sided copies The duplex unit is used to make double-sided copies. Manual double-sided copies Feed a single-sided copy through the manual bypass tray or load it into the 1st drawer to make a double-sided copy without - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 15
original setting is only available if the optional duplexing document feeder is installed. The double-sided copy settings are only available if the optional duplex unit is installed. Booklet-binding is only available if both the optional finisher DF-625 and the duplex - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 16
documents containing only text. "Map" setting Select this setting when copying documents with a background color or documents containing pencil markings or fine colored lines. "Copied Image" setting Select this setting when copying images (documents) printed with this copier. 1-9 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 17
function) G This parameter can be used to adjust the density of the copy. Glossy Mode Setting G Select this setting when copying glossy images. Screen Pattern Settings G These settings reduce moire patterns that occur when copying printed photo- graphs (which contain shading) or documents containing - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 18
1.2 Available Features 1-11 1 Before Making Copies Chapter 1 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 19
If the printer controller is not installed, scanning cannot be performed. • Press to use this machine as a copier. • When the [Copy] key is pressed, the key indicator lights up in green to indicate that the machine is in Copy mode. *Copy mode is selected as a default. • Press to enter an access code - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 20
, such as the zoom ratio or size, selected using the keypad. • The scanned image is erased. 11 [Stop] key • Press to stop a copy operation. • Scanning continue an interrupted copy job. • If this key is pressed while the copier is warming up, scanning for the job begins. (Queued copy) See p. - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 21
Before Making Copies Chapter 1 1 1.4 Adjusting the Angle of the Control Panel 1.4 Adjusting the Angle of the Control Panel The control panel can be adjusted to any of three angles. Adjust the control panel to the angle that allows for easy operation. 1-14 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 22
1.4 Adjusting the Angle of the Control Panel To adjust the angle of the control panel 1 Pull the control panel release lever toward you, and then push down on the control panel. 2 The angle of the control panel stops at the middle position. 3 To adjust the control panel to an even steeper angle, - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 23
can be queued. Queuing a job during warm-up ➜ An image can be scanned (a job can be queued) while the machine If a job is queued, printing begins after the copier has finished warming up (after about 5 minutes at controller, the machine assumes that the user has changed and automatically resets all - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 24
length of time after the last operation until the copier enters Energy Saver mode can be specified using the "Energy Saver" function on the User's Choice: 1 screen. For more details, refer to "Specifying Default Settings ("User's Choice" Functions)" of "Utility Mode Operations" in the Administrator - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 25
Chapter 1 1 1.5 Turning the Copier On and Off To recover from Sleep mode ➜ Press the [Start] key. (The Sleep mode can also be canceled by pressing any key on the operation panel or by touching the touch panel.) Then, continue with the operations described in "When the copier is turned on" on page - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 26
while a queued job or stored data is waiting to be printed, otherwise the jobs will be deleted. When the copier is turned off G The following are cleared. ❍ Settings that are not programmed, such as the number of copies ❍ Jobs queued to be printed ❍ Data scanned - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 27
selected settings, the settings that are available, and the copier status. Default Settings The settings selected when the copier is turned on (when the power switch is set G Density: Standard G Glossy Mode: Off G Auxiliary functions: All off G Color Image Adjust: Standard G Creation: All off 1-20 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 28
. set screen. For more details, refer to "Administrator Mode Operations" of "Utility Mode Operations" in the Administrator Operations volume. The default settings that the copier resets all functions to can be specified using the Utility mode. For more details, refer to "Specifying Default Settings - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 29
Before Making Copies Chapter 1 1 Structure of the Display Settings screen 1.6 Using the Touch Panel 1 Message display 2 Screen tabs 3 Available functions/settings 4 Selected settings 5 Job display 6 Job Log screen 1-22 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 30
Item Name Description 1 Message display The current copier status, operating instructions, warnings/ precautions, and other data including the performed or waiting to be performed are displayed (if printer controller COLOR PRINTER CONTROLLER CPC31C-M is installed). • The current sending/ - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 31
1 1.6 Using the Touch Panel Before Making Copies Chapter 1 1-24 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 32
2Basic Copy 2 Operations Basic Copy Operations Chapter 2 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 33
procedure for making basic copies is described below. Basic Copy Operations Chapter 2 Check that the [Copy] key indicator is lit in green and that the copier is in Copy mode. • If the [Scan] key is lit in green, press the [Copy] key. Press the [Panel Reset] key. • In order to prevent - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 34
Basic Copy Operations Chapter 2 2.1 Making Basic Copies 2 Make sure that the Zoom setting "×1.000" is selected. • For details, refer to "Specifying a Zoom Setting" (p. 5-8). Make sure that the Paper setting "Auto Paper" is selected. • For details, refer to "Selecting the Paper Setting" (p. 5-12 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 35
2 2.1 Making Basic Copies Touch [Job Log]. • The printing status of the programmed job and the job's settings can be viewed. • For details, refer to "Controlling Jobs" (p. 6-1). To quit copying, press the [Stop] key. Basic Copy Operations Chapter 2 2-4 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 36
document, load it so that the side that you wish to copy faces up and the top is toward the rear of the copier. Then, adjust the document guides to fit the size of the document. Touch [Paper]. Make sure that paper of the same size as the document is loaded into - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 37
document, load it so that the side that you wish to copy faces up and the top is toward the rear of the copier. Then, adjust the document guides to fit the size of the document. Touch [Zoom]. Touch [LetterÖ11 × 17]. Touch [Paper]. Make sure that 11 × 17-size paper is - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 38
, load it so that the side that you wish to copy faces up and the top is toward the left side of the copier. Then, adjust the document guides to fit the size of the document. Touch [Zoom]. Touch [11 × 17ÖLetter]. Touch [Paper]. Make sure that Letter-size paper is loaded - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 39
document, load it so that the side that you wish to copy faces up and the top is toward the rear of the copier. Then, adjust the document guides to fit the size of the document. Touch [OrigÖCopy], and then touch [4in1/Booklet]. Touch [1-4in1], and then touch [Enter]. Touch [Paper - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 40
2 Position the book face down onto the original glass. When positioning the document, position it so that the top is toward the rear of the copier. In addition, align the center of the book with the book mark on the document scale. Touch [OrigÖCopy], and then touch [Book]. Make sure - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 41
copy from a single-sided postcard onto a postcard loaded into the manual bypass tray is described below. Position the postcard document face down onto document, position it so that the top is toward the rear of the copier. Touch [OrigÖCopy]. Touch [Original Direction]. Touch the setting for a - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 42
2 Prepare one postcard. Load the postcard into the manual bypass tray with the top of the postcard entering the feed slot and the side to be printed onto facing down. (The side where the address is written should face up.) Adjust the paper guides to the size of the postcard. Lightly slide - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 43
Basic Copy Operations Chapter 2 2 2.3 Stopping Printing 2.3 Stopping Printing A job can be canceled while it is being printed. To stop/restart/delete a print job 1 Press the [Stop] key while the job is being printed. The printing stops. The message "Job has been stopped." appears. 2 To continue - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 44
2.3 Stopping Printing 2-13 2 Basic Copy Operations Chapter 2 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 45
job), refer to "Increase Priority screen" (p. 6-14). ✎ Note Some functions cannot be interrupted. In addition, certain functions cannot be set if the copier is in Interrupt mode. For more details, refer to the "Function Combination Table" in the Administrator Operations volume. To interrupt copying - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 46
2.4 Interrupting a Copy Job 2 7 If the job that printing was interrupted for is ready for printing, the interrupted job stops being printed and the job that printing was interrupted for is printed. When printing is finished, the job that printing was interrupted for is removed from the job display - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 47
Basic Copy Operations Chapter 2 2 2.5 Making Test Copies (Copy 1 Set) 2.5 Making Test Copies (Copy 1 Set) Before printing a large number of copies, a sample copy can be printed so you can check the specified settings. This is convenient for checking the selected settings before printing. If a job - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 48
2.5 Making Test Copies (Copy 1 Set) 2 The message "Job has been done improperly. Check the record." appears. 7 Touch [Enter]. Basic Copy Operations Chapter 2 2-17 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 49
mode available from the User's Choice screen. Settings should be made by the administrator. ❍ Settings cannot be made by anyone who does not log in using the administrator access code. ❍ For details on the administrator access code, contact the authorized service representative. To make copies - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 50
3 3Loading Paper Loading Paper Chapter 3 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 51
that meets the following specifications. Paper Types 3.1 Paper Specifications Paper Type Weight (lbs.) Paper Source, Etc. Manual bypass tray 1st drawer 2nd drawer Paper feed unit*1 Large capacity cabinet*1 Double-sided copies*2 Finished copies*3 Plain Paper 17 lbs. to 24 lbs. 2 2 2 2 2 2 2 Thick - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 52
cabinet*1 - Paper Length 5-1/2 in. to 18 in. - - Standard paper: Paper Size Paper Source, Etc. Manual bypass tray 1st drawer 2nd drawer Paper feed unit*1 Large capacity cabinet*1 Double-sided copies*2 Finished copies*3 12.25 × 18 L 2 2 - - - 2 2 Ledger L (11 in. × 17 in. L) 2 2 2 2 - 2 2 11 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 53
Loading Paper Chapter 3 3 3.1 Paper Specifications Paper Capacity Paper Type Paper Source, Etc. Manual bypass tray 1st drawer 2nd drawer Paper feed unit*1 Large capacity cabinet*1 Plain Paper Thick Paper 1 1 sheet 250 sheets 500 sheets 500 sheets 2,500 sheets 1 sheet 20 sheets - - - Thick - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 54
paper misfeeds may occur. Overhead transparencies that have already been fed through the copier (even if the transparency is still blank) Paper that has been printed on by a heat-transfer printer or an inkjet printer Paper that is either extremely thick or extremely thin Folded, curled, wrinkled, or - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 55
3.2 Print Area 3.2 Print Area Any part of the image within the area indicated below is not printed. G paper (C) (For details on using the copier to print from a computer when the printer controller is installed, refer to the manual for the printer controller.) B A C Paper output direction - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 56
Loading Paper Chapter 3 3.4 Automatically Selecting the Paper Source 3 3.4 Automatically Selecting the Paper Source If the selected paper drawer runs out of paper while a print job is being copied and a different paper drawer is loaded with paper meeting the following conditions, the other paper - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 57
until it locks into place. ✎ Note Be careful not to touch the surface of the paper take-up roller with your hands. 3 Slide the lateral guides to fit the size of paper to be loaded. ✎ Note For paper of a non-standard size, first load the paper, and then adjust the lateral - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 58
drawer so that the side of the paper to be printed onto (the side facing up when the package was unwrapped) faces up. 6 When making manual double-sid- ed copies, load the paper so that the second side (the blank side) faces up. ✎ Note If the paper is curled, flatten it - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 59
Loading Paper Chapter 3 3 ✎ Tip When loading 4 × 6L paper, load them with the shorter side as the leading edge, as shown. ✎ Note Do not load 4 × 6L paper crosswise, as shown. ✎ Tip After pressing down the envelopes to make sure that all air is removed and making sure that the folds of the flaps are - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 60
3.5 Loading Paper 3 ✎ Note Do not load envelopes crosswise, as shown. Loading Paper Chapter 3 ✎ Tip When loading overhead projector transparencies, load them with the longer side as the leading edge, as shown. ✎ Note Do not load overhead projector transparencies lengthwise. 3-11 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 61
of a non-standard size has been loaded, slide the lateral guides against the edges of the loaded paper. 8 Close the paper sided copy on plain paper During manual double-sided copying Thick paper 1 Second side of a double-sided copy on thick paper 1 During manual double-sided copying Thick paper - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 62
3.5 Loading Paper 3 Setting the Paper Size for the 1st Drawer Loading Paper Chapter 3 Since the size of the paper loaded into the 1st drawer is automatically detected, it is usually not necessary to set the paper size. However, it may be necessary to set the paper size if the paper size is not - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 63
3 3.5 Loading Paper To set a paper size in metric measurements 1 Touch [Paper]. A screen that shows the specified paper size settings appears. 2 Select the 1st drawer, and then touch [Size Change]. 3 Touch [Metric]. The Input screen appears with paper sizes in metric measurements. 4 Select the - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 64
Loading Paper Chapter 3 3.5 Loading Paper 3 6 Touch . 7 Touch and to select the length of side Y for the paper that is loaded. ❍ Touch change. until the cursor moves below the fraction that you wish to The entered length of side Y appears. 8 Touch [Enter], and then touch [Enter] in the - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 65
Loading Paper Chapter 3 3 3.5 Loading Paper 7 Touch and to select the length of side Y for the paper that is loaded. ❍ Touch change. until the cursor moves below the fraction that you wish to The entered length of side Y appears. 8 Touch [Size Registration]. 9 Touch either [1] or [2]. 10 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 66
3.5 Loading Paper 3 Loading Paper Into the 2nd Drawer or a Paper Feed Unit 1 Pull out the paper drawer. 2 Press down on the paper-lifting of the paper take-up roller with your hands. 3 Remove the trailing-edge guide, and then re-install it for the size of paper to be loaded. Paper take-up roller 3 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 67
drawer or optional paper feed units. If you wish to make copies onto paper other than plain paper, feed it through the manual bypass tray or the 1st set the "Specialty Paper" function 1 Press the [Utility] key. 2 Touch [User's Choice: 2]. 3 Touch [Specialty Paper]. 4 Select the paper drawer that you - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 68
from the large capacity cabinet. If you wish to make copies onto paper other than plain paper, feed it through the manual bypass tray or the 1st drawer. The paper guide in the large capacity cabinet has been installed for Letter Csize paper. When loading additional paper, remove any paper remaining - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 69
"To set the "Specialty Paper" function" of the Administrator Operations volume. To set the "Specialty Paper" function 1 Press the [Utility] key. 2 Touch [User's Choice: 2]. 3 Touch [Specialty Paper]. 4 Select the 3rd drawer. 5 Select the desired special paper setting. Loading Paper Chapter 3 3-20 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 70
drawer, or if you wish to copy onto special paper. 1 Touch [Paper]. A screen that shows the specified paper size settings appears. 2 Select the manual bypass tray. 3 The Paper Input Size screen appears. Loading Paper Chapter 3 4 Select the setting for the size of paper that is loaded. ❍ For paper - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 71
second side (the blank side) faces down. ❍ Copies will be made on the surface of the paper facing down when paper is loaded into the manual bypass tray. ✎ Tip When loading 4 × 6 L paper, load them with the shorter side as the leading edge, as shown. ✎ Note Do not load 4 × 6 L paper crosswise, as - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 72
Loading Paper Chapter 3 3.5 Loading Paper 3 ✎ Tip Before loading envelopes, press them down to make sure that all air is removed, and make sure that the folds of the flaps are firmly pressed, otherwise the envelopes may become wrinkled or a paper misfeed may occur. Load the envelopes with the - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 73
them with the longer side as the leading edge, as shown. ✎ Note Do not load Overhead Projector Transparencies Lengthwise, as shown. 15 Adjust the paper guides to fit the size of paper that is loaded. 16 Lightly slide the paper into the feed slot as much as possible so that the - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 74
4Original 4 Documents Original Documents Chapter 4 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 75
double-sided documents. See page 4-5. The document is placed directly on the original glass, then scanned. Each page of the document must be positioned manually (i.e., the previous one must be removed and the next one placed on the original glass). This method is best with books and other documents - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 76
4.1 Document Feeding 4 Multi-sheet feeding (Document of mixed sizes) Document paper type Document paper size Paper capacity Orientation Single-sided documents Double-sided documents Plain paper: 13-1/4 lbs. to 29-1/4 lbs. (50 g/m2 to 110 g/m2) Refer to the "Mixed originals paper sizes" table - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 77
Coated documents, such as heat-sensitive or carbon-backed paper G Inkjet printer paper G Documents just after printed with this copier Document Precautions (Manual Feeding) The following precautions should be observed when manually feeding the types of documents listed below. Handle the documents as - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 78
feeder to function properly. 1 If large-sized documents are to be loaded, pull out the document support. Original Documents Chapter 4 2 Load the document face up in the document feed tray. 3 Slide the adjustable document guides to fit the size of the document. 4 Be sure to adjust the document - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 79
Original Documents Chapter 4 4 6 Touch [Original Direction]. The Original Direction screen appears. 4.2 Feeding the Document 7 Select the setting appropriate for your document, and then touch [Enter]. ❍ If the orientation of the document is different from that of the selected Original Direction - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 80
from the document output tray. 14 Carefully lower the document feed tray. 4 Lever CAUTION Do not press on the lever at the rear of the copier. ➜ When closing the document feed tray, do not press on the lever at the rear of the - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 81
the document face up as shown, making sure that all pages are aligned at the back edge and on the left side. 2 Slide the document guide at the front of the copier to the edge of the largest page. 3 Load the document so that all pag- es are aligned along the document - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 82
4.2 Feeding the Document 4 5 In the Basic screen, touch [Mixed Orig Detection]. 6 Select the desired copy settings, and then press the [Start] key. The topmost page of the document is fed in and scanning begins. Original Documents Chapter 4 4-9 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 83
glass, and then it is scanned. Each page of the document must be positioned manually (i.e., the previous one must be removed and the next one placed on the either the rear or the left side of the copier. When loaded lengthwise: Original Documents Chapter 4 3 Align the document with the docu- ment - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 84
5 Position the top of the book toward the back of the copier, as shown. Original Documents Chapter 4 6 Position the document with the binding aligned with the mark on the top document width scale. Touch [OrigÖCopy - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 85
4 7 Touch [OrigÖCopy]. The OriginalÖCopy screen appears. 4.2 Feeding the Document Original Documents Chapter 4 8 Touch [Original Direction]. The Original Direction screen appears. 9 Select the setting appropriate for your document, and then touch [Enter]. ❍ If the orientation of the document is - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 86
4.2 Feeding the Document 4 12 When using a mode where multiple documents are to be scanned, such as when making 2in1 copies, the message shown at the right appears. 13 To continue scanning, remove the document, position the next page of the doc- ument on the original glass, and then press the [ - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 87
4 4.2 Feeding the Document Original Documents Chapter 4 4-14 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 88
5Specifying 5 Copy Settings Specifying Copy Settings Chapter 5 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 89
Settings Chapter 5 There are three Color settings. G Auto Color The copier automatically determines whether the document is in color or in black and white Level Adjust." function on the User's Choice: 2 screen. For more details, refer to "Specifying Default Settings ("User's Choice" Functions)" of " - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 90
" or "Non-Sort" setting is automatically selected can be specified using the "Intelligent Sorting" function on the User's Choice: 2 screen. For more details, refer to "Specifying Default Settings ("User's Choice" Functions)" of "Utility Mode Operations" in the Administrator Operations volume. 5-3 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 91
must not be selected. G The "Criss Cross Mode" function on the User's Choice: 2 screen must be set to "Yes". ❍ For details on the "User's Choice" functions, refer to "Specifying Default Settings ("User's Choice" Functions)" in the Administrator Operations volume. Sorting ("Sort" Setting) The - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 92
❍ For details on the "User's Choice" functions, refer to "Specifying Default Settings ("User's Choice" Functions)" in the is used, the paper length must be between 7-1/4 in. and 17 in. G The copier must not enter Interrupt mode. Hole-Punching Two holes for filing copies in binders can be - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 93
5 5.2 Selecting a Finishing Setting G If nonstandard-size paper is used, the paper length must be between 7-1/4 in. and 17 in. G The copier must not enter Interrupt mode. To specify Finishing settings Specifying Copy Settings Chapter 5 1 Touch [Finishing]. A screen appears, showing the available - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 94
is shown in the screen. Be sure to position the document according to the instructions that appear. Example: Document position when the "3-Hole Punch" setting is used The is toward the rear of the copier. For details, refer to "Feeding the Document" (p. 4-5). Specifying Copy Settings Chapter 5 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 95
5 5.3 Specifying a Zoom Setting 5.3 Specifying a Zoom Setting Copies of documents can be enlarged or reduced. Specifying Copy Settings Chapter 5 There are eight ways to change the zoom ratio. G Automatic scaling ("Auto Size" setting) G Full size ("×1.000" setting) G Enlarging ("Enlarge" settings - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 96
5.3 Specifying a Zoom Setting 5 Minimizing ("Minimal" Setting) The copy is slightly reduced (×0.930). G Selecting the "Minimal" setting ensures that any part of the original positioned at the edge of the page will not be cut off in the copy. G The zoom ratio of the "Minimal" setting can be changed - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 97
5 5.3 Specifying a Zoom Setting Specifying a Custom Zoom Ratio ("CustomZoom" Setting) Specifying Copy Settings Chapter 5 To enter a custom zoom ratio 1 Touch [Zoom]. A screen appears, showing the available Zoom settings. 2 Touch [CustomZoom]. 3 Using the keypad, type in the desired zoom ratio ( - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 98
5.3 Specifying a Zoom Setting 5 To recall a stored custom zoom ratio 1 Touch [Zoom]. A screen appears, showing the available Zoom settings. 2 Touch [CustomZoom]. 3 Touch [Set]. 4 Touch [1], [2] or [Minimal]. 5 Touch [Enter]. The entered zoom ratio is recalled. To specify different vertical and - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 99
Copy Settings Chapter 5 There are three ways of selecting the paper. G Automatic paper selection ("Auto Paper" setting) G Manual paper selection G Manual bypass tray selection ("Bypass" setting) Selecting the Paper Setting Automatically ("Auto Paper" Setting) G The most appropriate paper size - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 100
If the document is smaller than the size of the selected paper, the image is printed in the center of the paper. Whether or not the image is centered in the paper can be specified using the "Centering" function on the User's Choice: 2 screen. For more details, refer to "Specifying Default Settings - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 101
5 5.4 Selecting the Paper Setting Auto Paper Source Selection Feature If the selected paper drawer runs out of paper during printing and a different paper drawer is loaded with paper meeting the following conditions, the other paper drawer is automatically selected so printing can continue. If the - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 102
5.5 Selecting the Orig > Copy Settings (Original Settings) 5 5.5 Selecting the Orig > Copy Settings (Original Settings) The type of original and the desired type of copy can be specified. In addition, the document orientation and the position of the binding margin can also be specified. The - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 103
5 5.5 Selecting the Orig > Copy Settings (Original Settings) Book separation ("Separation" setting of the "Book" parameter) Select these settings to make a single-sided copy of each of the two pages of an open book. Book spread ("Book Spread" setting of the "Book" parameter) Select these settings - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 104
5.5 Selecting the Orig > Copy Settings (Original Settings) 5 To specify an Original setting Specifying Copy Settings Chapter 5 1 Touch [OrigÖCopy]. The OriginalÖCopy screen appears. 2 Select the setting for the type of document to be copied. 3 If "Book" is selected, a screen showing the - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 105
5 5.5 Selecting the Orig > Copy Settings (Original Settings) 7 If the settings for frame-erasing or center- & frame-erasing are selected, touch and to specify the width of the area to be erased. The width of the area erased with the center-erasing setting is not changed by touching and . ? - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 106
5.5 Selecting the Orig > Copy Settings (Original Settings) 5 12 To specify a non-stan- dard size, touch [Photo Size or Custom Size], and then specify the size of the document. 13 Touch . 14 Touch and to specify the length of side X for the document that is being copied (between 2 in. and 17 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 107
sided 4in1 ("2-4in1" setting) ✎ Note Double-sided, double-sided 2in1 and double-sided 4in1 copying are only available if the optional duplex unit is installed. Booklet-binding and center-erasing are only available if the optional finisher DF625 is installed. Specifying Copy Settings Chapter 5 5-20 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 108
Single-sided copy ("1" setting) Select this setting to make single-sided copies. Double-sided copy ("2" setting) Select this setting to use the duplex unit to make double-sided copies. With this setting, the paper use can be reduced to about half. Single-sided 2in1 copy ("1-2in1" setting) Select - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 109
copy order during 4in1 copying can be specified using the "4in1 Copy Order" function on the User's Choice: 2 screen. For more details, refer to "Specifying Default Settings ("User's Choice" Functions)" of "Utility Mode Operations" in the Administrator Operations volume. Booklet copy ("4in1/Booklet - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 110
booklet binding can be specified using the "2in1, 4in1, Booklet Copy Zoom" function on the User's Choice: 2 screen. For more details, refer to "Specifying Default Settings ("User's Choice" Functions)" of "Utility Mode Operations" in the Administrator Operations volume. Conditions for making booklets - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 111
5 5.6 Selecting the Orig > Copy Settings (Copy Settings) To specify a Copy setting Specifying Copy Settings Chapter 5 1 Touch [OrigÖCopy]. The OriginalÖCopy screen appears. 2 Select the desired Copy setting. 3 To select 4in1 copying or booklet copying, touch [4in1/Booklet]. The 4in1/Booklet - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 112
5.6 Selecting the Orig > Copy Settings (Copy Settings) 5 7 If "Bind" is selected, [Center Erase] appears. ❍ As a default, "Center Erase" is selected. 8 If you do not wish to use center-erasing, touch [Center Erase] to cancel it. 9 Touch [Enter]. The OriginalÖCopy screen appears again. Specifying - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 113
5 5.7 Selecting the Orig > Copy Settings (Original Direction and Margin Position Settings) 5.7 Selecting the Orig > Copy Settings (Original Direction and Margin Position Settings) The type of original and the desired type of copy can be specified. In addition, the document orientation and the - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 114
. Select this setting for a landscape document with the top toward the right of the copier. Select this setting for a portrait document with the top toward the right of the copier. As a default, no setting is selected. ✎ Note If the orientation of the document is different from that of the selected - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 115
will not be printed correctly. When loading a document with a binding margin, position the top of the document toward the rear of the copier. For details, refer to "Feeding the Document" (p. 4-5). Specifying Thick Documents ("Thick Original" Setting) Select this setting if a thick document is being - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 116
5.7 Selecting the Orig > Copy Settings (Original Direction and Margin Position Settings) 5 To specify conditions for the original Specifying Copy Settings Chapter 5 As a default, no setting is selected. 1 Touch [OrigÖCopy]. The OriginalÖCopy screen appears. 2 Touch [Original Direc- tion]. The - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 117
not be printed correctly. ❍ When loading a document with a binding margin, position the top of the document toward the rear of the copier. For details, refer to "Feeding the Document" (p. 4-5). 6 If a thick document is being copied, touch [Thick Original]. Specifying Copy Settings Chapter 5 5-30 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 118
a Photo/Density Setting The type of original can be specified. There are ten document types. G Text combined with images ("Text&Photo" setting) G Photographs ("Photo Image" setting) G Printed photos ("Printed Image" setting) G Text only ("Text" setting) G Maps ("Map" setting) G Copies ("Copied - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 119
this setting when copying documents with a background color or documents containing pencil markings or fine colored lines. A sharp copy image is produced. "Copied Image" setting Select this setting when copying images (documents) printed with this copier. Specifying Copy Settings Chapter 5 5-32 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 120
a Photo/Density Setting 5 Specifying the Density Parameters Manual background density G One of eight density settings can be "Screen Pattern" settings are available if the "Text", "Photo Image", "Printed Image" or "Copied Image" setting is selected. ❍ Gradation: Select this setting to give - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 121
5 To select a Photo/Density setting 5.8 Selecting a Photo/Density Setting 1 Touch [Photo/Density]. The Photo/Density screen appears. 2 Select the setting for the type of document to be copied. 3 Touch [Density]. The Density screen appears. 4 Touch [Lighter] or [Darker] to select the desired - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 122
[Photo/Density]. The Photo/Density screen appears. 2 Touch [Glossy Mode]. To select a Screen Pattern setting If moire patterns appears in the copied image, change the Screen Pattern setting, and then make another copy to compare the effects. Make the copies using the Screen Pattern setting with the - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 123
5 5.9 Checking the Settings 5.9 Checking the Settings The Copy mode settings can be checked or changed. There are three screens that allow you to check the settings. To check the settings 1 Press the [Mode Check] key on the operation panel. 2 The first screen showing the current settings appears - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 124
5.9 Checking the Settings 5 4 Touch [Next] to display the third screen of settings. Specifying Copy Settings Chapter 5 5 To change a setting: ❍ Touch the setting that you wish to change. The corresponding screen appears. ❍ Change the setting as desired. ✎ Tip The corresponding screens for the " - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 125
Specifying Copy Settings Chapter 5 5 5-38 5.9 Checking the Settings - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 126
6Controlling 6 Jobs Controlling Jobs Chapter 6 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 127
6 6.1 Description of Jobs 6.1 Description of Jobs Controlling Jobs Chapter 6 Job Any set of consecutive operations, such as those for making copies, scans or computer printouts Multi-job feature G While one job is being printed, another job can be queued. As many as 49 jobs can be queued. G When - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 128
6.1 Description of Jobs 6 To change the status of a queued job The status of jobs marked as "Waiting Print" can be changed. Change the status according to the procedure described below. 1 Touch either [Job Log] or [Job Control] to display the queued jobs. 2 Select the job whose status you wish to - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 129
these arrows to display jobs higher or lower in the list (higher or lower in the printing order). Displays the type (source) of the job "COPIER" is displayed for copy jobs. Displays the status of the job Indicates the tray where the printed page will be fed out Displays the name - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 130
6.2 Job Log Screens 6 No. Item Name 10 Completion time Description Displays the time when printing of the job is expected to be finished Scan List Screen The programmed details of scan jobs can be viewed. Touch [Scan List]. The Scan List screen appears. Jobs queued to be printed appear in - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 131
appear in order from the top of the list. However, jobs programmed in user boxes are not displayed. Touch [Basic] to display the Basic screen again. in the printing order). Displays the type (source) of the job "COPIER" is displayed for copy jobs. Displays the status of the job Displays the - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 132
these arrows to display jobs higher or lower in the list (higher or lower in the printing order). Displays the type (source) of the job "COPIER" is displayed for copy jobs. Indicates the tray where the printed page will be fed out Displays the name of the file for print jobs - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 133
6 No. Item Name 11 Job status 6.2 Job Log Screens Description Displays details of any errors that may have occurred while the job was being performed Controlling Jobs Chapter 6 6-8 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 134
job was programmed Displays the time when printing of the job is expected to be finished Displays the job process details Displays details of any errors that may have occurred while the job was being performed 6-9 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 135
can be printed. Touch [Job Control]. The Scanned Job screen appears. Images stored in the memory, using the "Scan to Memory" function from the lower in the printing order). Displays the type (source) of the job "COPIER" is displayed for copy jobs. Displays the status of the job Indicates the - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 136
printing. 3 Touch [Job Log], and check the status of the job. For details on setting the "Scan to Memory" function, refer to "Storing the Scanned Image in the Memory ("Scan to Memory" Function)" of "Auxiliary Functions" in the Advanced Operations volume. Controlling Jobs Chapter 6 6-11 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 137
6 6.3 Job Control Screens Unlock Job Screen Jobs locked with the "Locked Job" function can be printed. Touch [Unlock Job]. The Unlock Job screen appears. Stored jobs locked with "Locked Job" function are listed. Locked jobs appear in order from the top of the list. The programmed details of a - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 138
that you wish to unlock. 2 Using the keypad, enter the four-digit unlocking code. ❍ For the unlocking code, consult the person who programmed the job using the "Locked Job" function. 3 The the "Locked Job" function, refer to the manual of the printer controller. Controlling Jobs Chapter 6 6-13 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 139
these arrows to display jobs higher or lower in the list (higher or lower in the printing order). Displays the type (source) of the job "COPIER" is displayed for copy jobs. Displays the status of the job Indicates the tray where the printed page will be fed out Displays the name - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 140
6.3 Job Control Screens 6 To increase the priority of (print) a job 1 Select the job that you wish to prioritize. 2 Touch [OK]. The job is move from the Increase Priority list to the list of jobs to be printed, and the job is queued for printing. 3 Touch [Job Log], and check the status of the job. - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 141
off ✎ Tip The following functions cannot be used together with the "Combine Jobs" function. "Multi-Page Enlargement" function "Postcard" function "Image Repeat" function "Color Separation" function "OHP Interleaving" function Touch [Combine Jobs]. The Combine Jobs screen appears. Jobs stored in the - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 142
these arrows to display jobs higher or lower in the list (higher or lower in the printing order). Displays the type (source) of the job "COPIER" is displayed for copy jobs. Displays the status of the job Indicates the tray where the printed page will be fed out Displays the name - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 143
6 6.3 Job Control Screens To combine jobs 1 Select the job that you wish to combine other jobs with. 2 Select the jobs that you wish to combine with the first job selected. ❍ To combine more than two jobs, repeat the above step until all jobs that you wish to combine are selected. ❍ Up to five - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 144
the keypad, enter the access code. For details on specifying account access codes, refer to "Supervising Copier Use ("Copy Track" Function)" in the Administrator Operations volume. For details on setting the "User Box" function, refer to the manual of the printer controller. Touch [Basic] to - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 145
that has been locked, use the keypad to enter the four- digit account access code, and then touch [Open Job]. 4 Touch [Scanned Job]. The selected job is retrieved as a stored job. 5 Select the job stored in the user box that you wish to print. ❍ To print multiple jobs, continue selecting all jobs - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 146
the list. If the "Memory Recall" function on the User's Choice: 1 screen has been set to "Yes", [Memory memory). However, if the "Memory Recall" function on the User's Choice: 1 screen has been set to "No", all setting the "Memory Recall" function on the User's Choice:1 screen, refer to "To set the - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 147
these arrows to display jobs higher or lower in the list (higher or lower in the printing order). Displays the type (source) of the job "COPIER" is displayed for copy jobs. Indicates the tray where the printed page will be fed out Displays the name of the file for print jobs - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 148
7 7Index Index Chapter 7 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 149
Start key 1-13 Stop key 1-13 touch panel 1-12, 1-20 touch panel contrast adjusting dial 1-13 Utility key 1-12 Control panel release lever 1-13 Copied Image setting 1-9, 5-32 7-2 - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 150
orientation 5-27 Document types 4-2 Double-sided copies 5-21 automatic 1-7 double-sided 2in1 copies 1-7, 5-21 double-sided 4in1 copies 1-8, 5-22 manual 1-7 Double-sided originals 1-7, 5-15 E Energy saver mode 1-17 F Feeding the document document of mixed sizes 4-8 multi-sheet feeding - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 151
6-10 Job List screen 6-6 Jobs ...6-2 L Loading paper 1st drawer 3-8 2nd drawer 3-17 large capacity cabinet 3-19 manual bypass tray 3-21 M Making basic copies 2-2 Manual feeding 2-10, 4-2, 4-10 Map setting 1-9, 5-32 Margin setting 5-26, 5-28 Memory Recall screen 6-21 Mixed originals - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 152
10 Power switch turning OFF 1-19 turning ON 1-16 Practical copy examples 2-5 Print area 3-6 Print List screen 6-4 Print Log screen 6-7 Printed Image setting 1-9, 5-32 Printing scanned data 6-11 Q Queuing jobs 6-2 S Scan List screen 6-5 Scan Log screen 6-9 Scanned Job screen 6-10 Screen - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 153
7 7 7.1 Index T Test copies 2-16 Text & Photo setting 1-9, 5-32 Text setting 1-9, 5-32 Thick original 5-28 Touch panel 1-20 Turning the copier On and Off 1-16 U Unlock Job screen 6-12 UserBox screen 6-19 Z Zoom settings 1-5, 5-8 auto size 1-5, 5-8 custom zoom 1-6, 5-9 enlargement - Kyocera KM-C2030 | KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 154
) 238-9487 Dallas Parts Distribution Center & National Training Center: 2825 West Story Road, Irving, Texas 75038-5299 TEL : (972) 659-0055 FAX : (972) 570-5816 KYOCERA MITA CANADA, LTD. 6120 Kestrel Road, Mississauga, Ontario L5T 1S8, Canada TEL : (905) 670-4425 FAX : (905) 670-8116
OPERATION GUIDE
(Basic Operations)
Please read the Operation Guide before using
the copier.
Keep it close to the copier for easy reference.
4581-7772-02
KM-C2030
KM-C3130