Kyocera KM-C2030 KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 103

5 5.5 Selecting the Orig > Copy Settings (Original Settings) Book separation ("Separation" setting of the "Book" parameter) Select these settings to make a single-sided copy of each of the two pages of an open book. Book spread ("Book Spread" setting of the "Book" parameter) Select these settings to make a single-sided copy containing two pages side-by-side from the two pages of an open book. Book-margin-erasing ("Book Erase" function of the "Book" parameter) Select these settings to erase the area along the binding and around the text from a copy made using the "Separation" setting of the "Book" parameter. There are three book-margin-erasing settings. Select the one that fits your need. Center-erasing Select this setting to erase the shadow of the binding of the book from the copy. Specifying Copy Settings Chapter 5 Frame-erasing Select this setting to erase the shadow of the edges of the book from the copy. The width of the area to be erased can be set between 1/16 in. and 15/16 in. Center- & frame-erasing Select this setting to erase the shadow of the binding and the shadow of the edges of the book from the copy. The width of the area to be erased can be set between 1/16 in. and 15/16 in. ✎ Using the "Book Erase" settings When a "Book Erase" setting is selected, be sure to touch [Original Size] on the Book Erase screen and specify the size of the original. If the document size is incorrect, the correct area of the copy will not be erased. Select a size that corresponds to the size of the book spread. 5-16