Kyocera KM-C2030 KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 96

5.3 Specifying a Zoom Setting 5 Minimizing ("Minimal" Setting) The copy is slightly reduced (×0.930). G Selecting the "Minimal" setting ensures that any part of the original positioned at the edge of the page will not be cut off in the copy. G The zoom ratio of the "Minimal" setting can be changed to any ratio between ×0.900 and ×0.999. ❍ For details on changing the zoom ratio, refer to "Specifying a Custom Zoom Ratio ("CustomZoom" Setting)". Zooming Any zoom ratio (between ×0.250 and ×4.000) can be specified. G Touch and to specify the desired zoom ratio. Each time or is touched, the zoom ratio is increased or decreased by an increment of ×0.001. Custom Sizing ("CustomZoom" Setting) Any zoom ratio (between ×0.250 and ×4.000) can be specified. G Use the keypad to enter the desired zoom ratio. G Up to two zoom ratios entered using the keypad can be stored. Vertical and Horizontal Scaling ("X/Y Zoom" Setting) The copy size can be changed by specifying different scaling proportions (between ×0.250 and ×4.000) for the vertical and the horizontal dimention. To specify a Zoom setting Specifying Copy Settings Chapter 5 1 Touch [Zoom]. A screen appears, showing the available Zoom settings. 2 Select the desired Zoom setting. 5-9