Kyocera KM-C2030 KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 128
Controlling Jobs
View all Kyocera KM-C2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
6.1 Description of Jobs 6 To change the status of a queued job The status of jobs marked as "Waiting Print" can be changed. Change the status according to the procedure described below. 1 Touch either [Job Log] or [Job Control] to display the queued jobs. 2 Select the job whose status you wish to change, and then touch [Change Mode]. The Job Mode Change screen appears. 3 The current status is displayed. Select the status that you wish to change. 4 The Job Mode Change screen for the status appears. Select the new status, and then touch [Enter]. 5 Check that the status of the job has been changed, and then touch [Enter]. To delete a queued job Jobs marked as "Waiting Print" can be deleted. 1 Touch either [Job Log] or [Job Control] to display the queued jobs. 2 Select the job that you wish to delete, and then touch [Delete]. The selected job is deleted. To cancel a job that is being printed While a job is being printed, that job cannot be deleted from the Job Log or Job Control screens. Cancel a job that is being printed according to the procedure described below. 1 While a job is being printed, press the [Stop] key on the operation panel. Printing stops and the screen that allows you to select which job to cancel appears. 2 Check the details for the jobs that appear, and then, from the jobs that are being printed or scanned, select the job that you wish to cancel. Then, touch [Delete]. To quit canceling the job being printed, press the [Start] key. Printing continues. 3 After touching [Delete], the message "Job has been done improperly. Check the record." appears. The job being printed is canceled. 4 Touch [Enter]. Controlling Jobs Chapter 6 6-3