Kyocera KM-C2030 KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 99

5 5.4 Selecting the Paper Setting 5.4 Selecting the Paper Setting The paper used for making copies can be selected. Specifying Copy Settings Chapter 5 There are three ways of selecting the paper. G Automatic paper selection ("Auto Paper" setting) G Manual paper selection G Manual bypass tray selection ("Bypass" setting) Selecting the Paper Setting Automatically ("Auto Paper" Setting) G The most appropriate paper size based on the size of the document loaded and the specified zoom ratio is automatically selected. G However, if the paper in a drawer is specified as special paper, the paper in that drawer is not selected with the "Auto Paper" setting. "Specialty Paper" function If the paper in a drawer is specified as special paper, the paper in that drawer is not automatically selected with the Paper setting "Auto Paper". The "Specialty Paper" function is useful if special paper is loaded into a paper drawer. For more details, refer to "To set the "Specialty Paper" function" in chapter 5 "Utility Mode Operations" of the Administrator Operations volume. Selecting the Paper Manually G The drawer containing the appropriate paper that you wish to use can be select- ed. Selecting the Manual Bypass Tray ("Bypass" Setting) G Copies can be made onto the paper loaded into the manual bypass tray. 5-12