Kyocera KM-C2030 KM-C3130/C2030 Operation Guide Basic Oper Rev-1B - Page 47
Making Test Copies Copy 1 Set
View all Kyocera KM-C2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Basic Copy Operations Chapter 2 2 2.5 Making Test Copies (Copy 1 Set) 2.5 Making Test Copies (Copy 1 Set) Before printing a large number of copies, a sample copy can be printed so you can check the specified settings. This is convenient for checking the selected settings before printing. If a job is currently being printed, that job is interrupted so one test copy can be printed. After the single test copy is printed, the interrupted job automatically continues printing. The number of copies remaining after the test print are recorded and the job is queued to be printed. To make a test copy 1 Select the desired Copy mode settings. 2 In the Basic screen, touch [Copy 1 Set]. 3 Press the [Start] key. Scanning of the document begins, and the job is queued. 4 Only one test copy is printed. Check the test copy. A message appears, asking if the job should be continued. 5 If the remaining number of copies can be made with the current settings, touch [Yes]. The print job is queued for printing of the remaining number of copies. 6 If the remaining number of copies cannot be made with the current settings, touch [No]. The remaining number of copies of the job for the test print is canceled. 2-16