Lexmark T630n User's Reference - Page 196
Reattaching the shield and closing the doors, Setup Guide
UPC - 734646532211
View all Lexmark T630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Removing optional cards 4 Grasp the card and gently pull it straight up and out of the connector. 5 Place the option card in its original packaging. If you did not save the original packaging, wrap it in paper and store it in a box for protection. 6 If you need to install another option card, refer to the Setup Guide. If not, reinstall the cover plate. 7 Align the cover plate on inside surface of the slot. 8 Insert the two screws on the back of the printer so they pass through the cover plate and tighten them. 9 See Reattaching the shield and closing the doors. 196
196
Removing optional cards
4
Grasp the card and gently pull it straight up and out of the connector.
5
Place the option card in its original packaging. If you did not save the original packaging, wrap
it in paper and store it in a box for protection.
6
If you need to install another option card, refer to the
Setup Guide
. If not, reinstall the cover
plate.
7
Align the cover plate on inside surface of the slot.
8
Insert the two screws on the back of the printer so they pass through the cover plate and
tighten them.
9
See
Reattaching the shield and closing the doors
.