Lexmark T630n User's Reference - Page 277

Understanding the printer messages Message 54 Serial Option Error 54 Network Software Error 54 Std Network Software Error 55 Unsupported Flash in Slot X 55 Unsupported Option in Slot X 56 Serial Port Disabled 56 Parallel Port Disabled 56 Std Parallel Port Disabled 56 USB Port Disabled 56 Standard USB Port Disabled 57 Configuration Change What this message means What you can do The printer has detected a serial interface error on a serial port. • Make sure the serial link is set up correctly and you are using the appropriate cable. • Press Go to clear the message and continue printing. The job may not print correctly. • Press Menu to open the Job Menu and reset the printer. The printer cannot establish communications with an installed network port. • Press Go to clear the message and continue printing. The job may not print correctly. • Program new firmware for the network interface by way of the parallel port. • Press Menu to open the Job Menu and reset the printer. The printer detects an unsupported flash memory card in one of the connectors. Turn the printer off. Remove the unsupported option card. The printer detects an unsupported Turn the printer off. Remove the option card in one of the connectors. unsupported option card. Data has been sent to the printer through a serial port, but the serial port is disabled. • Press Go to clear the message. The printer discards any data received through the serial port. • Make sure the Serial Buffer menu item in the Serial Menu is not set to Disabled. See also: Serial Buffer Data has been sent to the printer through a parallel port, but the parallel port is disabled. • Press Go to clear the message. The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item in the Parallel Menu is not set to Disabled. See also: Parallel Buffer Data has been sent to the printer through a USB port, but the USB port is disabled. • Press Go to clear the message. The printer discards any data received through the USB port. • Make sure the USB Buffer menu item in the USB Menu is not set to Disabled. See also: USB Buffer The printer could not restore jobs from Press Go to clear the message. the disk because the configuration of the printer changed. 277