Lexmark T630n User's Reference - Page 274
Unsupported, Print Cartridge, Short Paper, Res Save Off Deficient, Memory, Insufficient Collation
UPC - 734646532211
View all Lexmark T630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
Understanding the printer messages Message 32 Unsupported Print Cartridge 34 Short Paper 35 Res Save Off Deficient Memory 37 Insufficient Collation Area 37 Insufficient Defrag Memory What this message means What you can do An unsupported print cartridge is installed. Remove the print cartridge and install a new one. Use Extra High Yield cartridges only in the T632. See also: Replacing the print cartridge The printer has determined that the length of the paper in the source specified on the second line of the display is too short to print the formatted data. For auto-size sensing trays, this error occurs if the guides are not in the correct position. • Press Go to clear the message and continue printing. The printer does not automatically reprint the page that prompted the message. • Make sure the Paper Size setting in the Paper Menu is correct for the size paper you are using. If MP Feeder Size is set to Universal, make sure your paper is large enough for the formatted data. • Press Menu to open the Job Menu and cancel the current job. See also: Print media guidelines The printer lacks the memory needed to enable Resource Save. This message usually indicates too much memory is allocated for one or more of the printer link buffers. • Press Go to disable Resource Save and continue printing. • To enable Resource Save after you get this message: - Make sure the link buffers are set to Auto, and exit the menus to activate the link buffer changes. - When Ready is displayed, enable Resource Save from the Setup Menu. • Install additional memory. The printer memory (or hard disk, if installed) does not have the free space necessary to collate the print job. • Press Go to print the portion of the job already stored and begin collating the rest of the job. • Press Menu to open the Job Menu and cancel the current job. See also: Canceling a print job The printer cannot defragment flash memory, because the printer memory used to store undeleted flash resources is full. • Delete fonts, macros, and other data in printer memory. • Install additional printer memory. 274