Lexmark T630n User's Reference - Page 267

Understanding the printer messages Message Held Jobs may be lost Held Jobs May Not Be Restored Insert Staple Cartridge Insert Tray Install or Cancel Job What this message means The printer memory is too full to continue processing print jobs. The printer memory cannot restore Print and Hold jobs from the printer hard disk. The staple cartridge in the finisher is missing or is installed incorrectly. The specified tray is either missing or not fully inserted into the printer. The printer is requesting that a specified device be installed so it can print a job. is one of the following: • Bin x • Tray x • Duplex • Env Feeder What you can do • Press Go to clear the message and continue printing. The printer frees memory by deleting the oldest held job and continues deleting held jobs until there is enough printer memory to process the job. • Press Stop to clear the message without deleting any held jobs. The current job may not print correctly. • Press Menu to open the Job Menu and cancel the current job. • To avoid this error in the future: - Delete fonts, macros, and other data stored in printer memory. - Install more printer memory. The messages 37 Insufficient Memory and Held Jobs may be lost alternate on the display. See also: Using the Print and Hold function; 37 Insufficient Memory Press Go to clear the message. Some of the Print and Hold jobs stored on the disk will not be restored. See also: 37 Insufficient Memory • Correctly install the staple cartridge to clear the message. • Press Go to ignore the message and continue printing without stapling. Insert the specified tray completely into the printer. See also: Loading print media in standard and optional trays • Turn the printer off, install the specified device, and restart the printer. • Press Menu to open the Job Menu and cancel the current job. 267