Lexmark T630n User's Reference - Page 269

Understanding the printer messages Message Menus Disabled Network Card Busy Network Network , No Jobs Found. Retry? Not Ready Ovrflow Bin Full Parallel Performing Self Test Power Saver What this message means What you can do The printer menus are disabled. You cannot change the printer settings from the operator panel. You can still open the Job Menu to cancel a job that is printing or to select a confidential job or a held job that you want to print. If you need access to the printer menus, contact your network administrator. See also: Disabling operator panel menus An internal print server (also called an Wait for the message to clear. internal network adapter or INA) is being reset. A network interface is the active communication link. A network interface is the active communication link, where represents the active communication link and represents the channel. The four-digit personal identification number (PIN) you entered is not associated with any confidential print job. • Press Go to enter another PIN. • Press Stop to clear the PIN entry prompt. See also: Printing a confidential job The printer is not ready to receive or Press Go to make the printer ready process data. Someone pressed Stop to receive jobs. to take the printer offline. The mailbox's designated overflow bin Remove the stack of paper from the is full. bin to clear the message. A parallel interface is the active communication link. The printer is running the series of start-up tests it performs after it is turned on. Wait for the message to clear. The printer is ready to receive and process data. It is reducing its electricity consumption while idle. If the printer remains inactive for the period of time specified in the Power Saver menu item (20 minutes is the factory default), the Power Saver message replaces the Ready message on the display. • Send a job to print. • Press Go to quickly warm the printer to normal operating temperature and display the Ready message. 269