Lexmark T630n User's Reference - Page 74
Changing the print media size for the 2000-sheet drawer, step 7,
UPC - 734646532211
View all Lexmark T630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Using and loading the optional 2000-sheet drawer Changing the print media size for the 2000-sheet drawer Your 2000-sheet drawer comes pre-configured for either letter or A4 size. To change the print media size prior to installation, proceed to step 7 of the following instructions now. If you are changing the print media size for a unit that is already attached to a printer and a power source, proceed with step 1: 1 Open the loading door. 2 Push the elevator button located on the left side of the door opening. See the illustration on page 72. 3 Remove paper from the elevator tray and close the loading door. 4 Re-open the door. The printer elevator tray should be approximately halfway up. 5 Unplug the power cord. 6 Remove the printer and all attached options from the 2000-sheet drawer. CAUTION: Remove the attached options one at a time. Make sure your fingers are not under the printer when you set it down. Use the handholds on the printer or ask someone to help you lift it. 7 Locate the size selector knob on top of the drawer. See page 75 for an illustration and location of the knob. Note: Six paper selections are available. Each paper selection is color-coded. A new print media size is displayed on the operator panel after the paper elevator tray is in the up position. 8 To make a selection, turn the knob completely in a counterclockwise direction. This action sets the print media size to legal (LGL). 74