Netgear GSM7224v1 GSM7212 Command line reference manual - Page 113
vlan port ingressfilter all, Global Config, vlan protocol group, vlan protocol group add protocol
View all Netgear GSM7224v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver- 6.1.13 vlan port ingressfilter all This command enables ingress filtering for all ports. If ingress filtering is disabled, frames received with VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN. Default disabled Format vlan port ingressfilter all Mode Global Config 6.1.13.1 no vlan port ingressfilter all This command disables ingress filtering for all ports. If ingress filtering is disabled, frames received with VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN. Format no vlan port ingressfilter all Mode 6.1.14 Global Config 6.1.15 vlan protocol group This command adds protocol-based VLAN group to the system. The is a character string of 1 to 16 characters. When it is created, the protocol group will be assigned a unique number that will be used to identify the group in subsequent commands. Format vlan protocol group Mode Global Config 6.1.16 vlan protocol group add protocol This command adds the to the protocol-based VLAN identified by . A group may have more than one protocol associated with it. Each interface and protocol combination can only be associated with one group. If adding a protocol to a group causes any conflicts with interfaces currently associated with the group, this command will fail and the protocol will not be added to the group. The possible values for protocol are ip, arp, and ipx. Default none Format vlan protocol group add protocol Mode Global Config VLAN Commands 6-7 v1.0, February 2007