Netgear GSM7224v1 GSM7212 Command line reference manual - Page 262
Total Packets Received Without Error
View all Netgear GSM7224v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver- Dot1x Statistics Time Since Counters Last Cleared RSTP BPDUs Received - Rapid Spanning Tree Protocol Bridge Protocol Data Units received MSTP BPDUs Transmitted - Multiple Spanning Tree Protocol Bridge Protocol Data Units sent MSTP BPDUs Received - Multiple Spanning Tree Protocol Bridge Protocol Data Units received EAPOL Frames Received - The number of valid EAPOL frames of any type that have been received by this authenticator. EAPOL Frames Transmitted - The number of EAPOL frames of any type that have been transmitted by this authenticator. The elapsed time, in days, hours, minutes, and seconds since the statistics for this port were last cleared. If you specify the switchport value, the following information appears: Octets Received - The total number of octets of data received by the processor (excluding framing bits but including FCS octets). Total Packets Received Without Error- The total number of packets (including broadcast packets and multicast packets) received by the processor. Unicast Packets Received - The number of subnetwork-unicast packets delivered to a higher-layer protocol. Multicast Packets Received - The total number of packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address. Broadcast Packets Received - The total number of packets received that were directed to the broadcast address. Note that this does not include multicast packets. Receive Packets Discarded - The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. A possible reason for discarding a packet could be to free up buffer space. 15-12 v1.0, February 2007 System Maintenance Commands