Netgear GSM7224v1 GSM7212 Command line reference manual - Page 248
show ip access-lists, show access-lists
View all Netgear GSM7224v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver- 14.8.3 show ip access-lists This command displays an IP ACL is the number used to identify the IP ACL. Format show ip access-lists Mode Privileged EXEC Rule Number This displays the number identifier for each rule that is defined for the IP ACL. Action This displays the action associated with each rule. The possible values are Permit or Deny. Protocol This displays the protocol to filter for this rule. Source IP Address This displays the source IP address for this rule. Source IP Mask This field displays the source IP Mask for this rule. Source Ports This field displays the source port for this rule. Destination IP Address This displays the destination IP address for this rule. Destination IP Mask This field displays the destination IP Mask for this rule. Destination Ports This field displays the destination port for this rule. Service Type Field Match This field indicates whether an IP DSCP, IP Precedence, or IP TOS match condition is specified for this rule. Service Type Field Value This field indicates the value specified for the Service Type Field Match (IP DSCP, IP Precedence, or IP TOS). 14.8.4 show access-lists This command displays IP ACLs and MAC access control lists information for a designated interface and direction. Format show access-lists interface in Mode Privileged EXEC ACL Type Type of access list (IP or MAC). 14-38 Quality of Service (QoS) Commands v1.0, February 2007