Netgear GSM7224v1 GSM7212 Command line reference manual - Page 96
spanning-tree mst priority
View all Netgear GSM7224v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver- 5.1.13.1 no spanning-tree mst instance This command removes a multiple spanning tree instance from the switch and reallocates all VLANs allocated to the deleted instance to the common and internal spanning tree. The parameter is a number that corresponds to the desired existing multiple spanning tree instance to be removed. Format no spanning-tree mst instance Mode Global Config 5.1.14 spanning-tree mst priority This command sets the bridge priority for a specific multiple spanning tree instance. The parameter is a number that corresponds to the desired existing multiple spanning tree instance. The priority value is a number within a range of 0 to 61440 in increments of 4096. If you specify 0 (defined as the default CIST ID) as the , this command sets the Bridge Priority parameter to a new value for the common and internal spanning tree. The bridge priority value is a number within a range of 0 to 61440. The twelve least significant bits are masked according to the 802.1s specification. This causes the priority to be rounded down to the next lower valid priority. Default 32768 Format spanning-tree mst priority Mode Global Config 5.1.14.1 no spanning-tree mst priority This command sets the bridge priority for a specific multiple spanning tree instance to the default value, i.e. 32768. The parameter is a number that corresponds to the desired existing multiple spanning tree instance. If 0 (defined as the default CIST ID) is passed as the , this command sets the Bridge Priority parameter for the common and internal spanning tree to the default value, i.e. 32768. Format spanning-tree mst priority Mode Global Config 5-8 Spanning Tree Protocol Commands v1.0, February 2007