Netgear GSM7224v1 GSM7212 Command line reference manual - Page 92
spanning-tree forceversion, spanning-tree forward-time
View all Netgear GSM7224v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver- 5.1.6.1 no spanning-tree edgeport all This command disables Edge Port mode for all ports within the common and internal spanning tree. Format spanning-tree edgeport all Mode Global Config 5.1.7 spanning-tree forceversion This command sets the Force Protocol Version parameter to a new value. The Force Protocol Version can be one of the following: • 802.1d - ST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1d functionality supported) • 802.1w - RST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1w functionality supported) • 802.1s - MST BPDUs are transmitted (IEEE 802.1s functionality supported) Default 802.1s Format spanning-tree forceversion Mode Global Config 5.1.7.1 no spanning-tree forceversion This command sets the Force Protocol Version parameter to the default value, i.e. 802.1s. Format no spanning-tree forceversion Mode Global Config 5.1.8 spanning-tree forward-time This command sets the Bridge Forward Delay parameter to a new value for the common and internal spanning tree. The forward-time value is in seconds within a range of 4 to 30, with the value being greater than or equal to "(Bridge Max Age / 2) + 1". Default 15 Format spanning-tree forward-time Mode Global Config 5-4 Spanning Tree Protocol Commands v1.0, February 2007