Netgear GSM7224v1 GSM7212 Command line reference manual - Page 146
set gmrp interfacemode, show gmrp configuration
View all Netgear GSM7224v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver- 8.3.2 set gmrp interfacemode This command enables GARP Multicast Registration Protocol. If an interface which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel (LAG), GARP functionality is disabled on that interface. GARP functionality is subsequently reenabled if routing is disabled and port-channel (LAG) membership is removed from an interface that has GARP enabled. Default disabled Format set gmrp interfacemode Modes Interface Config Global Config 8.3.2.1 no set gmrp interfacemode This command disables GARP Multicast Registration Protocol. If an interface which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel (LAG), GARP functionality is disabled. GARP functionality is subsequently re-enabled if routing is disabled and port-channel (LAG) membership is removed from an interface that has GARP enabled. Format no set gmrp interfacemode Modes Interface Config Global Config 8.3.3 show gmrp configuration This command displays GARP information for one or all interfaces. Format show gmrp configuration { | all} Modes Privileged EXEC User EXEC Interface This displays the slot/port of the interface that this row in the table describes. Join Timer Specifies the interval between the transmission of GARP PDUs registering (or re-registering) membership for an attribute. Current attributes are a VLAN or multicast group. There is an instance of this timer on a per-port, per-GARP participant basis. Permissible values are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20 centisec- 8-8 GARP, GVRP, and GMRP Commands v1.0, February 2007