Netgear GSM7224v1 GSM7212 Command line reference manual - Page 90
spanning-tree bpdumigrationcheck, spanning-tree configuration name
View all Netgear GSM7224v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver- 5.1.1.1 no spanning-tree This command sets the spanning-tree operational mode to disabled. While disabled, the spanning-tree configuration is retained and can be changed, but is not activated. Format no spanning-tree Mode Global Config 5.1.2 spanning-tree bpdumigrationcheck This command enables BPDU migration check on a given interface. The all option enables BPDU migration check on all interfaces. Format spanning-tree bpdumigrationcheck { | all} Mode Global Config 5.1.2.1 no spanning-tree bpdumigrationcheck This command disables BPDU migration check on a given interface. The all option disables BPDU migration check on all interfaces. Format no spanning-tree bpdumigrationcheck { | all} Mode Global Config 5.1.3 spanning-tree configuration name This command sets the Configuration Identifier Name for use in identifying the configuration that this switch is currently using. The is a string of up to 32 characters. Default base MAC address in hexadecimal notation Format spanning-tree configuration name Mode Global Config 5.1.3.1 no spanning-tree configuration name This command resets the Configuration Identifier Name to its default. Format no spanning-tree configuration name Mode Global Config 5-2 Spanning Tree Protocol Commands v1.0, February 2007